[linux|Ubuntu]安裝雜牌掃描儀－方正F5580

[linux|Ubuntu]安裝雜牌掃描儀－方正F5580

Author: Slain.Carmick

呵呵，終於把掃描儀安裝上了，牌子是方正F5580，算是雜牌子了吧。

先貼一下firmware的下載地址： ccd68861.fw

不想進去的，這裏是簡單的steps

安裝sane，xsane，用sane-find-scanner  scanimage -L 搜索是否能夠識別你的usb掃描儀，然後xsane按照報錯信息下載fw。

我的報錯：device `gt68xx:libusb:002:002′ is a Plustek OpticPro U16B flatbed scanner

 

首先，安裝sane，新利得或者終端都可以 我喜歡終端

sudo apt-get install sane

之後，連接上你的掃描儀，在這裏我走了很大的彎路（如果你不放心，在以下的命令上加上sudo，高手莫要喧囂，不會出問題的。）。別人都說輸入  sane-find-scanner就可以了，倒是沒錯，找到了我的掃描儀。

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0×07b3, product=0×0402 [600DPI USB Scanner], chip=GT-6816) at libusb:002:002
# Your USB scanner was (probably) detected. It may or may not be supported by ！這句話最可恨！
# SANE. Try scanimage -L and read the backend’s manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can’t be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.

按照要求，我再次輸入 scanimage -L

出現了

device `gt68xx:libusb:002:002′ is a Plustek OpticPro U16B flatbed scanner

device `genesys:libusb:005:002' is a Medion MD5345/MD6228/MD6471 flatbed scanner（我的方正F6580出現這樣的信息）

終於找到了我的掃描儀，嘿嘿，開始掃描，不過這裏出現了問題。

輸入 xsane之後，（ubuntu自帶的GUI的sane，你可以依靠 sudo apt-get install xsane 來安裝），給我報了下面的錯誤。

[gt68xx] Couldn’t open firmware file (`/usr/share/sane/gt68xx/ccd68861.fw’): No such file or directory

看來是沒有firmware，去了sane的offical site，人家竟然說去windows下提取，想了想我那個可憐的deepin版本的瘸腿XP虛擬機，決定還是在網上找找fw，最後在一個.de的網站上找到了，我傳了上來（下載ccd68861.fw） ,cp到那個目錄，就可以了。

後來還出了 以下的報錯，不過只要開關下掃描儀就可以了。

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

 

 

根據上述方法，我公司的方正F6580能夠很好的在UBUNTU 8.10上工作，在此對原文作者表示感謝。在Linux上的工作可以很好的搬到單位環境上實現了。這是LINUX走向生產化的第一步。