唉！真不容易：關於fc2對prism2芯片的無線網卡的配置

1.安裝fc2（fc1,fc2內建隊prism2的支持）

2。下hostapd-0.2.5.tar.gz等工具與驅動。http://hostap.epitest.fi/

3. tar zxvf hostapd-0.2.5.tar.gz

4. cd hostapd-0.2.5

5. vi Makefile ,修改： KERNEL_PATH = /usr/src/linux-2.6.5-1.358

6. 修改內核：cd /usr/src/linux-2.6.5-1.358
            make oldconfig
     vi Makefile , 去掉EXTRAVERSION中的“custom”
            make modules
            make
7. 編譯：
 cd hostapd-0.2.5
        make
        make install

8. cd /lib/modules/2.6.5-1.358/kernel/drivers/net/wireless
        chmod u+x hostap*

9. reboot system

10. now config script:
 1. initial.sh:
  insmod /lib/modules/2.6.5-1.358/kernel/drivers/pcmcia/pcmcia_core.ko
                insmod /lib/modules/2.6.5-1.358/kernel/drivers/pcmcia/yenta_socket.ko
  insmod /lib/modules/2.6.5-1.358/kernel/drivers/pcmcia/ds.ko

  service pcmcia restart
        2. ap.sh:
  ifconfig wlan0 192.168.0.55
  iwconfig wlan0 mode managed essid 1 end off
  ifconfig eth0 down
  route add default gw 192.168.0.1 dev wlan0
 3. msr.sh:
  ifconfig eth0 down
  ifconfig wlan0 192.168.2.55
  iwconfig wlan0 mode ad-hoc essid msr enc off
  iwconfig wlan0 channel 11
  reout add default gw 192.168.2.11 dev wlan0

 

另：可以參考（沒試過）http://oob.freeshell.org/nzwireless/hostap.html