Linux下history命令用法



如果你經常使用 Linux 命令行,那麼使用 history(歷史)命令可以有效地提升你的效率。本文將通過實例的方式向你介紹 history 命令的 15 個用法。

  1. 使用 HISTTIMEFORMAT 顯示時間戳

    當你從命令行執行 history 命令後,通常只會顯示已執行命令的序號和命令本身。如果你想要查看命令歷史的時間戳,那麼可以執行:

    # export HISTTIMEFORMAT='%F %T '
    # history | more
    1 2008-08-05 19:02:39 service network restart
    2 2008-08-05 19:02:39 exit
    3 2008-08-05 19:02:39 id
    4 2008-08-05 19:02:39 cat /etc/redhat-release

    注意:這個功能只能用在當 HISTTIMEFORMAT 這個環境變量被設置之後,之後的那些新執行的 bash 命令纔會被打上正確的時間戳。在此之前的所有命令,都將會顯示成設置 HISTTIMEFORMAT 變量的時間。[感謝 NightOwl 讀者補充]

  2. 使用 Ctrl+R 搜索歷史

    Ctrl+R 是我經常使用的一個快捷鍵。此快捷鍵讓你對命令歷史進行搜索,對於想要重複執行某個命令的時候非常有用。當找到命令後,通常再按回車鍵就可以執行該命令。如果想對找到的命令進行調整後再執行,則可以按一下左或右方向鍵。

    # [Press Ctrl+R from the command prompt, which will display the reverse-i-search prompt]
    (reverse-i-search)`red‘: cat /etc/redhat-release
    [Note: Press enter when you see your command, which will execute the command from the history]
    # cat /etc/redhat-release
    Fedora release 9 (Sulphur)

  3. 快速重複執行上一條命令

    有 4 種方法可以重複執行上一條命令:

    1. 使用上方向鍵,並回車執行。
    2. 按 !! 並回車執行。
    3. 輸入 !-1 並回車執行。
    4. 按 Ctrl+P 並回車執行。
  4. 從命令歷史中執行一個指定的命令

    在下面的例子中,如果你想重複執行第 4 條命令,那麼可以執行 !4:

    # history | more
    1 service network restart
    2 exit
    3 id
    4 cat /etc/redhat-release
    # !4
    cat /etc/redhat-release
    Fedora release 9 (Sulphur)

  5. 通過指定關鍵字來執行以前的命令

    在下面的例子,輸入 !ps 並回車,將執行以 ps 打頭的命令:

    # !ps
    ps aux | grep yp
    root 16947 0.0 0.1 36516 1264 ? Sl 13:10 0:00 ypbind
    root 17503 0.0 0.0 4124 740 pts/0 S+ 19:19 0:00 grep yp

  6. 使用 HISTSIZE 控制歷史命令記錄的總行數

    將下面兩行內容追加到 .bash_profile 文件並重新登錄 bash shell,命令歷史的記錄數將變成 450 條:

    # vi ~/.bash_profile
    HISTSIZE=450
    HISTFILESIZE=450

  7. 使用 HISTFILE 更改歷史文件名稱

    默認情況下,命令歷史存儲在 ~/.bash_history 文件中。添加下列內容到 .bash_profile 文件並重新登錄 bash shell,將使用 .commandline_warrior 來存儲命令歷史:

    # vi ~/.bash_profile
    HISTFILE=/root/.commandline_warrior

  8. 使用 HISTCONTROL 從命令歷史中剔除連續重複的條目

    在下面的例子中,pwd 命令被連續執行了三次。執行 history 後你會看到三條重複的條目。要剔除這些重複的條目,你可以將 HISTCONTROL 設置爲 ignoredups:

    # pwd
    # pwd
    # pwd
    # history | tail -4
    44 pwd
    45 pwd
    46 pwd [Note that there are three pwd commands in history, after executing pwd 3 times as shown above]
    47 history | tail -4
    # export HISTCONTROL=ignoredups
    # pwd
    # pwd
    # pwd
    # history | tail -3
    56 export HISTCONTROL=ignoredups
    57 pwd [Note that there is only one pwd command in the history, even after executing pwd 3 times as shown above]
    58 history | tail -4

  9. 使用 HISTCONTROL 清除整個命令歷史中的重複條目

    上例中的 ignoredups 只能剔除連續的重複條目。要清除整個命令歷史中的重複條目,可以將 HISTCONTROL 設置成 erasedups:

    # export HISTCONTROL=erasedups
    # pwd
    # service httpd stop
    # history | tail -3
    38 pwd
    39 service httpd stop
    40 history | tail -3
    # ls -ltr
    # service httpd stop
    # history | tail -6
    35 export HISTCONTROL=erasedups
    36 pwd
    37 history | tail -3
    38 ls -ltr
    39 service httpd stop
    [Note that the previous service httpd stop after pwd got erased]
    40 history | tail -6

  10. 使用 HISTCONTROL 強制 history 不記住特定的命令

    將 HISTCONTROL 設置爲 ignorespace,並在不想被記住的命令前面輸入一個空格:

    
     # export HISTCONTROL=ignorespace
    # ls -ltr
    # pwd
    # service httpd stop [Note that there is a space at the beginning of service, to ignore this command from history]
    # history | tail -3
    67 ls -ltr
    68 pwd
    69 history | tail -3
     
  11. 使用 -c 選項清除所有的命令歷史

    如果你想清除所有的命令歷史,可以執行:

    # history -c

  12. 命令替換

    在下面的例子裏,!!:$ 將爲當前的命令獲得上一條命令的參數:

    # ls anaconda-ks.cfg
    anaconda-ks.cfg
    # vi !!:$
    vi anaconda-ks.cfg

    補充:使用 !$ 可以達到同樣的效果,而且更簡單。[感謝 wanzigunzi 讀者補充]

    下例中,!^ 從上一條命令獲得第一項參數:

    # cp anaconda-ks.cfg anaconda-ks.cfg.bak
    anaconda-ks.cfg
    # vi -5 !^
    vi anaconda-ks.cfg

  13. 爲特定的命令替換指定的參數

    在下面的例子,!cp:2 從命令歷史中搜索以 cp 開頭的命令,並獲取它的第二項參數:

    # cp ~/longname.txt /really/a/very/long/path/long-filename.txt
    # ls -l !cp:2
    ls -l /really/a/very/long/path/long-filename.txt

    下例裏,!cp:$ 獲取 cp 命令的最後一項參數:

    # ls -l !cp:$
    ls -l /really/a/very/long/path/long-filename.txt

  14. 使用 HISTSIZE 禁用 history

    如果你想禁用 history,可以將 HISTSIZE 設置爲 0:

    # export HISTSIZE=0
    # history
    # [Note that history did not display anything]

  15. 使用 HISTIGNORE 忽略歷史中的特定命令

    下面的例子,將忽略 pwd、ls、ls -ltr 等命令:

    # export HISTIGNORE=”pwd:ls:ls -ltr:”
    # pwd
    # ls
    # ls -ltr
    # service httpd stop
    # history | tail -3
    79 export HISTIGNORE=”pwd:ls:ls -ltr:”
    80 service httpd stop
    81 history
    [Note that history did not record pwd, ls and ls -ltr]

 如果你經常使用Linux命令,那麼使用history命令無疑會提升你的工作效率。
History命令主要用於顯示歷史指令記錄內容, 下達歷史紀錄中的指令 。
1>History命令語法:
[test@linux]# history [n]
[test@linux]# history [-c]
[test@linux]# history [-raw] histfiles
參數:
n   :數字,要列出最近的 n 筆命令列表
-c  :將目前的shell中的所有 history 內容全部消除
-a  :將目前新增的history 指令新增入 histfiles 中,若沒有加 histfiles ,
則預設寫入 ~/.bash_history
-r  :將 histfiles 的內容讀到目前這個 shell 的 history 記憶中
-w  :將目前的 history 記憶內容寫入 histfiles
Linux系統當你在shell(控制檯)中輸入並執行命令時,shell會自動把你的命令記錄到歷史列表中,一般保存在用戶目錄下的.bash_history文件中。默認保存1000條,你也可以更改這個值。
如果你鍵入 history, history會向你顯示你所使用的前1000個歷史命令,並且給它們編了號,你會看到一個用數字編號的列表快速從屏幕上捲過。你可能不需要查看1000個命令中的所有項目, 當然你也可以加入數字來列出最近的 n 筆命令列表。
linux中history命令不僅僅讓我們可以查詢歷史命令而已. 我們還可以利用相關的功能來幫我們執行命令。
2>運行特定的歷史命令
history會列出bash保存的所有歷史命令,並且給它們編了號,我們可以使用“歎號接編號”的方式運行特定的歷史命令.
語法說明:
[test@linux]# [!number]  [!command] [!!]
參數說明:
number   :第幾個指令的意思;
command  :指令的開頭幾個字母
!        :上一個指令的意思!
3>History命令實戰
列出所有的歷史記錄:
[test@linux] # history
只列出最近10條記錄:
[test@linux] # history 10 (注,history和10中間有空格)
使用命令記錄號碼執行命令,執行歷史清單中的第99條命令
[test@linux] #!99 (!和99中間沒有空格)
重複執行上一個命令
[test@linux] #!!
執行最後一次以rpm開頭的命令(!?  ?代表的是字符串,這個String可以隨便輸,Shell會從最後一條歷史命令向前搜索,最先匹配的一條命令將會得到執行。)
[test@linux] #!rpm
逐屏列出所有的歷史記錄:
[test@linux]# history | more
立即清空history當前所有歷史命令的記錄
[test@linux] #history -c
除了使用history命令,在 shell 或 GUI 終端提示下,你也可以使用上下方向鍵來翻閱命令歷史(向下箭頭會向前翻閱),直到你找到所需命令爲止。這可以讓我們很方便地編輯前面的某一條命令,而不用重複輸入類似的命令。
History命令的用途確實很大!但需要小心安全的問題!尤其是 root 的歷史紀錄檔案,這是黑客們的最愛!因爲不小心的 root 會將很多的重要資料在執行的過程中會被紀錄在 ~/.bash_history 當中,如果這個檔案被解析的話,後果不堪設想!

發佈了14 篇原創文章 · 獲贊 6 · 訪問量 3萬+
發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章