原创 u-boot中memory(SDRAM/DDR)相關命令 -- meminfo

[u-boot: v2013.07-rc2] [Author: Bo Shen <[email protected]>] 1. 使能meminfo命令 通過定義:CONFIG_CMD_MEMINFO, 就可以使用memi

原创 u-boot中memory(SDRAM/DDR)相關命令 -- mw

[u-boot: v2013.07-rc2] [Author: Bo Shen <[email protected]>] 1. 使能mw命令 通過定義:CONFIG_CMD_MEMORY, 就可以使能mw命令。 注:

原创 u-boot中的date命令

[u-boot: v2013.07-rc3] [Author: Bo Shen <[email protected]>] 1. 使能date命令 需要定義:CONFIG_CMD_DATE, 由於date命令是讀取RTC內

原创 ffmpeg convert audio

The ffmpeg option for audio is as following ---------------------------------------------------------- Audio options: -

原创 u-boot Makefile 分析 -- 清除

[Author: Bo Shen <[email protected]> [u-boot: 2014.01-rc1] u-boot的Makefile中包括以下幾個清除命令:unconfig, clean, tidy, clobbe

原创 u-boot中memory(SDRAM/DDR)相關命令 -- base

[u-boot: v2013.07-rc2] [Author: Bo Shen <[email protected]>] 1. 使能base命令 通過定義:CONFIG_CMD_MEMORY, 就可以使能base命令。 注

原创 u-boot中memory(SDRAM/DDR)相關命令 -- md

[u-boot: v2013.07-rc2] [Author: Bo Shen <[email protected]>] 1. 使能md命令 通過定義:CONFIG_CMD_MEMORY, 就可以使能md命令。 注

原创 u-boot DFU implement ---- dfu-util (1)

[This article is just collecting the information of dfu] [dfu-util was originally written for the OpenMoko project:htt

原创 ubuntu package list

1. crc32 $ sudo apt-get install libarchive-zip-perl 點贊 收藏 分享 文章舉報 voice_shen 發佈了132 篇原創文

原创 Cross Compile lmbench

[Author: Bo Shen <[email protected]>] Original Page: http://www.bitmover.com/lmbench/ 1. get the source code     $

原创 u-boot訪問jffs2文件系統

[Author: Bo Shen <[email protected]>]   當我們需要讓u-boot從JFFS2文件系統中讀取Linux內核image來啓動系統,我們應該如做呢?答案其實很簡單:讓u-boot支持JFFS2文件系

原创 u-boot Makefile分析 -- (1)

[Author: Bo Shen <[email protected]>] [u-boot: 2014.01-rc1, e03c76c30342797a25ef9350e51c8daa0b56f1df] 下面進行u-boot Mak

原创 Remove one known host in ubuntu

Remove one known host in ubuntu @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @    WARNING: REMOTE HOST

原创 Shell colors: colorizing shell scripts

原始文章出處:http://www.bashguru.com/2010/01/shell-colors-colorizing-shell-scripts.html 點贊 收藏 分享 文章舉報

原创 where bond0 device come from

When debug Linux kernel, there is one more network device with "ifconfig -a", it show a bond0 device. detail informatio