原创 實驗指南:BGP基本配置
實驗指南 Mintconf thost Mintint l 10ip ad 62.120.1.1 255.255.0.0int l 20ip ad 62.121.1.1 255.255.0.0int l 30ip ad 62.12
原创 GRE & IPSEC ×××
實驗環境:R1和R2之間運行OSPFR4和R5之間運行OSPFR2,R3和R4之間運行EIGRP 初始配置(略) 1,GRE OVER IPSEC 在R2和R4之間建立GRE通道並建立OSPF鄰居R2:int tunnel 0
原创 實驗指南:BGP路由過濾
實驗指南 BGP路由過濾 初始配置R1conf tint l 0ip ad 1.1.1.1 255.255.255.255int s2/0ip ad 10.1.1.1 255.255.255.0encap fno arp fno
原创 Practice Lab 3:多路由環境在CISCO路由器上的應用
題目鏈接[url]http://bbs.51cto.com/thread-397627-1-1.html[/url] R1#sh run!interface Loopback0 ip address 137.20.1.17 255.
原创 實驗指南:BGP路徑選擇
實驗指南 初始配置 Willsconf thost Willsint l 0ip ad 1.1.1.1 255.255.255.255int s2/0encap fno arp fno frame inverno shutint s2
原创 Practice Lab 4:多路由環境在CISCO路由器上的應用(二)
原題在BBS:[url]http://bbs.51cto.com/viewthread.php?tid=399060&extra=page%3D1[/url] R1#sh runBuilding configuration...!int
原创 我的友情鏈接
sery無聊生活,積極面對豪客城J0ker: Deliverable security技術只是拿來玩的一個玩具Kendy56cto綜合佈線工作組Juniper學習Jeff Doyle
原创 OSPF綜合(下)--校驗
查看配置 R1#sh ip route ospfO IA 192.168.28.0/24 [110/11] via 192.168.18.8, 00:22:02, FastEthernet0/1 2.0.0.0/32 is subn
原创 Exchange.2003.安裝和基本管理
表 1 安裝Exchange Server 2003 的步驟和對應的權限 步驟 所需的權限或角色 啓用 Microsoft Windows® 2000 Server 或 Microsoft Windows Server™
原创 NAT with same subnetwork
R1 conf t int g2/0 ip add 10.1.1.1 255.255.255.0 no shut username R1 password cisco line vty 0 4 login local exit ip
原创 我的友情鏈接
sery無聊生活,積極面對豪客城J0ker: Deliverable security技術只是拿來玩的一個玩具Kendy56cto綜合佈線工作組Juniper學習Jeff Doyle
原创 OSPF ABR Type 3 LSA Filtering
Feature OverviewThe OSPF ABR Type 3 LSA Filtering feature extends the ability of an ABR that is running the OSPF protoco
原创 從EIGRP到OSPF的平滑過渡
全網初始使用的路由協議爲EIGRP,現要求全網啓用OSPF,實現EIGRP到OSPF的平滑過度。但R2 R3的1.1.23.0/24網段仍使用EIGRP。 初始配置R1conf tint l 0ip ad 1.1.1.1 255.
原创 爲基於類的策略選擇突發數據量和超額突發數據量
什麼是令牌桶在我們討論突發數據量之前,我們首先要理解令牌桶的概念。令牌桶本身沒有丟棄和優先級策略,令牌桶是這樣工作的:1. 令牌以一定的速率放入桶中。2. 每個令牌允許源發送一定數量的比特。3. 發送一個包,流量調節器就要從桶中刪除與包大小
原创 記微軟2008產品發佈大會
3月15日,早上10點多,我和我同學一起坐城鐵趕往工體去參加微軟2008發佈大會。 11點多終於到了,在北門排隊,突然看到有51CTO的大旗,本想過去找廢總套套磁,不過廢總好像不在,站那裏的幾個人都不認識。算了,等入場吧。