MD5算法 C#

轉載自http://bbs.csdn.net/topics/230067653

當我要寫一個MD5算法的程序時,發現中英文的語言描述都有一些不確切的地方,某些個細節 

講得不清楚,或者說很費解。最後不得不拿出C語言的源程序來調試,這對於理解算法是很不 
利的。於是就總結了一下我摸索到的一些要點。 

1.來歷 
MD5的全稱是message-digest algorithm 5(信息-摘要算法,在90年代初由mit laboratory 
for computer science和rsa data security inc的ronald l. rivest開發出來, 
經md2、md3和md4發展而來。http://www.ietf.org/rfc/rfc1321.txt,是一份最權威的文檔, 
由ronald l. rivest在1992年8月向ieft提交。 

2.用途 
MD5的作用是對一段信息(message)生成信息摘要(message-digest),該摘要對該信息具有 
唯一性,可以作爲數字簽名。用於驗證文件的有效性(是否有丟失或損壞的數據),對用戶 
密碼的加密,在哈希函數中計算散列值。 

3.特點 
輸入一個任意長度的字節串,生成一個128位的整數。由於算法的某些不可逆特徵,在加密應用 
上有較好的安全性。並且,MD5算法的使用不需要支付任何版權費用。 

4.說明 
唯一性和不可逆性都不是絕對的,從理論上分析是一種多對一的關係,但兩個不同的信息產生 
相同摘要的概率很小。不可逆是指從輸出反推輸入所需的運算量和計算時間太大,使用窮搜字 
典的方法又需要太多的存儲空間。 

5.算法描述 

算法輸入是一個字節串,每個字節是8個bit. 
算法的執行分爲以下幾個步驟: 

第一步,補位: 
MD5算法先對輸入的數據進行補位,使得數據的長度(以byte爲單位)對64求餘的結果是56。 
即數據擴展至LEN=K*64+56個字節,K爲整數。 
補位方法:補一個1,然後補0至滿足上述要求。相當於補一個0x80的字節,再補值 
爲0的字節。這一步裏總共補充的字節數爲0~63個。 

第二步,附加數據長度: 
用一個64位的整數表示數據的原始長度(以bit爲單位),將這個數字的8個字節按低位的在前, 
高位在後的順序附加在補位後的數據後面。這時,數據被填補後的總長度爲: 
LEN = K*64+56+8=(K+1)*64 Bytes。 

※注意那個64位整數是輸入數據的原始長度而不是填充字節後的長度,我就在這裏栽了跟頭. 

第三步,初始化MD5參數: 
有四個32位整數變量 (A,B,C,D) 用來計算信息摘要,每一個變量被初始化成以下 
以十六進制數表示的數值,低位的字節在前面。 
word A: 01 23 45 67 
word B: 89 ab cd ef 
word C: fe dc ba 98 
word D: 76 54 32 10 
※注意低位的字節在前面指的是Little Endian平臺上內存中字節的排列方式, 
而在程序中書寫時,要寫成: 
A=0x67452301 
B=0xefcdab89 
C=0x98badcfe 
D=0x10325476 

第四步,定義四個MD5基本的按位操作函數: 
X,Y,Z爲32位整數。 
F(X,Y,Z) = (X and Y) or (not(X) and Z) 
G(X,Y,Z) = (X and Z) or (Y and not(Z)) 
H(X,Y,Z) = X xor Y xor Z 
I(X,Y,Z) = Y xor (X or not(Z)) 

再定義四個分別用於四輪變換的函數。 
設Mj表示消息的第j個子分組(從0到15),<<<s表示循環左移s位,則四種操作爲: 
FF(a,b,c,d,Mj,s,ti)表示a=b+((a+(F(b,c,d)+Mj+ti)<<<s) 
GG(a,b,c,d,Mj,s,ti)表示a=b+((a+(G(b,c,d)+Mj+ti)<<<s) 
HH(a,b,c,d,Mj,s,ti)表示a=b+((a+(H(b,c,d)+Mj+ti)<<<s) 
II(a,b,c,d,Mj,s,ti)表示a=b+((a+(I(b,c,d)+Mj+ti)<<<s) 


第五步,對輸入數據作變換。 
處理數據,N是總的字節數,以64個字節爲一組,每組作一次循環,每次循環進行四輪操作。 
要變換的64個字節用16個32位的整數數組M[0 ...15]表示。而數組T[1 ... 64]表示一組常數, 
T[i]爲4294967296*abs(sin(i))的32位整數部分,i的單位是弧度,i的取值從1到64。 
具體過程如下: 

/* 設置主循環變量 */ 
For i = 0 to N/16-1 do 

/*每循環一次,把數據原文存放在16個元素的數組X中. */ 
For j = 0 to 15 do 
Set X[j] to M[i*16+j]. 
end /結束對J的循環 

/* Save A as AA, B as BB, C as CC, and D as DD. 
*/ 
AA = A 
BB = B 
CC = C 
DD = D 

/* 第1輪*/ 
/* 以 [abcd k s i]表示如下操作 
a = b + ((a + F(b,c,d) + X[k] + T[i]) <<< s). */ 
/* Do the following 16 operations. */ 
[ABCD 0 7 1] [DABC 1 12 2] [CDAB 2 17 3] [BCDA 3 22 4] 
[ABCD 4 7 5] [DABC 5 12 6] [CDAB 6 17 7] [BCDA 7 22 8] 
[ABCD 8 7 9] [DABC 9 12 10] [CDAB 10 17 11] [BCDA 11 22 12] 
[ABCD 12 7 13] [DABC 13 12 14] [CDAB 14 17 15] [BCDA 15 22 16] 


/* 第2輪* */ 
/* 以 [abcd k s i]表示如下操作 
a = b + ((a + G(b,c,d) + X[k] + T[i]) <<< s). */ 
/* Do the following 16 operations. */ 
[ABCD 1 5 17] [DABC 6 9 18] [CDAB 11 14 19] [BCDA 0 20 20] 
[ABCD 5 5 21] [DABC 10 9 22] [CDAB 15 14 23] [BCDA 4 20 24] 
[ABCD 9 5 25] [DABC 14 9 26] [CDAB 3 14 27] [BCDA 8 20 28] 
[ABCD 13 5 29] [DABC 2 9 30] [CDAB 7 14 31] [BCDA 12 20 32] 

/* 第3輪*/ 
/* 以 [abcd k s i]表示如下操作 
a = b + ((a + H(b,c,d) + X[k] + T[i]) <<< s). */ 
/* Do the following 16 operations. */ 
[ABCD 5 4 33] [DABC 8 11 34] [CDAB 11 16 35] [BCDA 14 23 36] 
[ABCD 1 4 37] [DABC 4 11 38] [CDAB 7 16 39] [BCDA 10 23 40] 
[ABCD 13 4 41] [DABC 0 11 42] [CDAB 3 16 43] [BCDA 6 23 44] 
[ABCD 9 4 45] [DABC 12 11 46] [CDAB 15 16 47] [BCDA 2 23 48] 


/* 第4輪*/ 
/* 以 [abcd k s i]表示如下操作 
a = b + ((a + I(b,c,d) + X[k] + T[i]) <<< s). */ 
/* Do the following 16 operations. */ 
[ABCD 0 6 49] [DABC 7 10 50] [CDAB 14 15 51] [BCDA 5 21 52] 
[ABCD 12 6 53] [DABC 3 10 54] [CDAB 10 15 55] [BCDA 1 21 56] 
[ABCD 8 6 57] [DABC 15 10 58] [CDAB 6 15 59] [BCDA 13 21 60] 
[ABCD 4 6 61] [DABC 11 10 62] [CDAB 2 15 63] [BCDA 9 21 64] 

/* 然後進行如下操作 */ 
A = A + AA 
B = B + BB 
C = C + CC 
D = D + DD 

Next i /* 結束對I的循環*/ 

第六步,輸出結果。 
A,B,C,D連續存放,共16個字節,128位。按十六進制依次輸出這個16個字節。 


最後,用程序語言實現算法後,可以輸入以下幾個信息對程序作一個簡單的測試, 
看看程序有沒有錯誤。 
 MD5 ("") = d41d8cd98f00b204e9800998ecf8427e 
 MD5 ("a") = 0cc175b9c0f1b6a831c399e269772661 
 MD5 ("abc") = 900150983cd24fb0d6963f7d28e17f72 
 MD5 ("message digest") = f96b697d7cb7938d525a2f31aaf161d0 
 MD5 ("abcdefghijklmnopqrstuvwxyz") = c3fcd3d76192e4007dfb496cca67e13b 
 MD5 ("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789") = 
d174ab98d277d9f5a5611c2c9f419d9f 
MD5 ("123456789012345678901234567890123456789012345678901234567890123456789 
01234567890") = 57edf4a22be3c955ac49da2e2107b67a 


MD5算法之C#程序 

MD5算法比較特別,最適合用彙編語言來寫,好多高級語言對之無能無力或效率極低。 
比如我最開始嘗試用Python和Euphoria編寫,發現不太容易。相比而言,C#作爲C家簇 
中新興的一門.net語言,功能比較全面。花了一晚上的工夫終於用C#最先實現了MD5。 
主要是由於對算法的一些細節不太注意,結果輸出總是不對,調試了好長時間。 

[code] 
//源文件:md5.cs 
// MD5 Alogrithm 
// by rufi 2004.6.20 http://rufi.yculblog.com/ 
using System; 
using System.Collections; 
using System.IO; 

public class MD5 { 
//static state variables 
private static UInt32 A; 
private static UInt32 B; 
private static UInt32 C; 
private static UInt32 D; 

//number of bits to rotate in tranforming 
private const int S11 = 7; 
private const int S12 = 12; 
private const int S13 = 17; 
private const int S14 = 22; 
private const int S21 = 5; 
private const int S22 = 9; 
private const int S23 = 14; 
private const int S24 = 20; 
private const int S31 = 4; 
private const int S32 = 11; 
private const int S33 = 16; 
private const int S34 = 23; 
private const int S41 = 6; 
private const int S42 = 10; 
private const int S43 = 15; 
private const int S44 = 21; 


/* F, G, H and I are basic MD5 functions. 
* 四個非線性函數: 

* F(X,Y,Z) =(X&Y)|((~X)&Z) 
* G(X,Y,Z) =(X&Z)|(Y&(~Z)) 
* H(X,Y,Z) =X^Y^Z 
* I(X,Y,Z)=Y^(X|(~Z)) 

* (&與,|或,~非,^異或) 
*/ 
private static UInt32 F(UInt32 x,UInt32 y,UInt32 z){ 
return (x&y)|((~x)&z); 

private static UInt32 G(UInt32 x,UInt32 y,UInt32 z){ 
return (x&z)|(y&(~z)); 

private static UInt32 H(UInt32 x,UInt32 y,UInt32 z){ 
return x^y^z; 

private static UInt32 I(UInt32 x,UInt32 y,UInt32 z){ 
return y^(x|(~z)); 


/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4. 
* Rotation is separate from addition to prevent recomputation. 
*/ 
private static void FF(ref UInt32 a,UInt32 b,UInt32 c,UInt32 d,UInt32 mj,int s,UInt32 ti){ 
a = a + F(b,c,d) + mj + ti; 
a = a << s | a >> (32-s); 
a += b; 

private static void GG(ref UInt32 a,UInt32 b,UInt32 c,UInt32 d,UInt32 mj,int s,UInt32 ti){ 
a = a + G(b,c,d) + mj + ti; 
a = a << s | a >> (32-s); 
a += b; 

private static void HH(ref UInt32 a,UInt32 b,UInt32 c,UInt32 d,UInt32 mj,int s,UInt32 ti){ 
a = a + H(b,c,d) + mj + ti; 
a = a << s | a >> (32-s); 
a += b; 

private static void II(ref UInt32 a,UInt32 b,UInt32 c,UInt32 d,UInt32 mj,int s,UInt32 ti){ 
a = a + I(b,c,d) + mj + ti; 
a = a << s | a >> (32-s); 
a += b; 


private static void MD5_Init(){ 
A=0x67452301; //in memory, this is 0x01234567 
B=0xefcdab89; //in memory, this is 0x89abcdef 
C=0x98badcfe; //in memory, this is 0xfedcba98 
D=0x10325476; //in memory, this is 0x76543210 

private static UInt32[] MD5_Append(byte[] input){ 
int zeros=0; 
int ones =1; 
int size=0; 
int n = input.Length; 
int m = n%64; 
if( m < 56 ){ 
zeros = 55-m; 
size=n-m+64; 

else if (m==56){ 
zeros = 0; 
ones = 0; 
size=n+8; 

else{ 
zeros = 63-m+56; 
size=n+64-m+64; 


ArrayList bs = new ArrayList(input); 
if(ones==1){ 
bs.Add( (byte)0x80 ); // 0x80 = $10000000 

for(int i=0;i<zeros;i++){ 
bs.Add( (byte)0 ); 


UInt64 N = (UInt64) n * 8; 
byte h1=(byte)(N&0xFF); 
byte h2=(byte)((N>>8)&0xFF); 
byte h3=(byte)((N>>16)&0xFF); 
byte h4=(byte)((N>>24)&0xFF); 
byte h5=(byte)((N>>32)&0xFF); 
byte h6=(byte)((N>>40)&0xFF); 
byte h7=(byte)((N>>48)&0xFF); 
byte h8=(byte)(N>>56); 
bs.Add(h1); 
bs.Add(h2); 
bs.Add(h3); 
bs.Add(h4); 
bs.Add(h5); 
bs.Add(h6); 
bs.Add(h7); 
bs.Add(h8); 
byte[] ts=(byte[])bs.ToArray(typeof(byte)); 

/* Decodes input (byte[]) into output (UInt32[]). Assumes len is 
* a multiple of 4. 
*/ 
UInt32[] output = new UInt32[size/4]; 
for(Int64 i=0,j=0;i<size;j++,i+=4){ 
output[j]=(UInt32)(ts[i] | ts[i+1]<<8 | ts[i+2]<<16 | ts[i+3]<<24); 

return output; 

private static UInt32[] MD5_Trasform(UInt32[] x){ 

UInt32 a,b,c,d; 

for(int k=0;k<x.Length;k+=16){ 
a=A; 
b=B; 
c=C; 
d=D; 

/* Round 1 */ 
FF (ref a, b, c, d, x[k+ 0], S11, 0xd76aa478); /* 1 */ 
FF (ref d, a, b, c, x[k+ 1], S12, 0xe8c7b756); /* 2 */ 
FF (ref c, d, a, b, x[k+ 2], S13, 0x242070db); /* 3 */ 
FF (ref b, c, d, a, x[k+ 3], S14, 0xc1bdceee); /* 4 */ 
FF (ref a, b, c, d, x[k+ 4], S11, 0xf57c0faf); /* 5 */ 
FF (ref d, a, b, c, x[k+ 5], S12, 0x4787c62a); /* 6 */ 
FF (ref c, d, a, b, x[k+ 6], S13, 0xa8304613); /* 7 */ 
FF (ref b, c, d, a, x[k+ 7], S14, 0xfd469501); /* 8 */ 
FF (ref a, b, c, d, x[k+ 8], S11, 0x698098d8); /* 9 */ 
FF (ref d, a, b, c, x[k+ 9], S12, 0x8b44f7af); /* 10 */ 
FF (ref c, d, a, b, x[k+10], S13, 0xffff5bb1); /* 11 */ 
FF (ref b, c, d, a, x[k+11], S14, 0x895cd7be); /* 12 */ 
FF (ref a, b, c, d, x[k+12], S11, 0x6b901122); /* 13 */ 
FF (ref d, a, b, c, x[k+13], S12, 0xfd987193); /* 14 */ 
FF (ref c, d, a, b, x[k+14], S13, 0xa679438e); /* 15 */ 
FF (ref b, c, d, a, x[k+15], S14, 0x49b40821); /* 16 */ 

/* Round 2 */ 
GG (ref a, b, c, d, x[k+ 1], S21, 0xf61e2562); /* 17 */ 
GG (ref d, a, b, c, x[k+ 6], S22, 0xc040b340); /* 18 */ 
GG (ref c, d, a, b, x[k+11], S23, 0x265e5a51); /* 19 */ 
GG (ref b, c, d, a, x[k+ 0], S24, 0xe9b6c7aa); /* 20 */ 
GG (ref a, b, c, d, x[k+ 5], S21, 0xd62f105d); /* 21 */ 
GG (ref d, a, b, c, x[k+10], S22, 0x2441453); /* 22 */ 
GG (ref c, d, a, b, x[k+15], S23, 0xd8a1e681); /* 23 */ 
GG (ref b, c, d, a, x[k+ 4], S24, 0xe7d3fbc8); /* 24 */ 
GG (ref a, b, c, d, x[k+ 9], S21, 0x21e1cde6); /* 25 */ 
GG (ref d, a, b, c, x[k+14], S22, 0xc33707d6); /* 26 */ 
GG (ref c, d, a, b, x[k+ 3], S23, 0xf4d50d87); /* 27 */ 
GG (ref b, c, d, a, x[k+ 8], S24, 0x455a14ed); /* 28 */ 
GG (ref a, b, c, d, x[k+13], S21, 0xa9e3e905); /* 29 */ 
GG (ref d, a, b, c, x[k+ 2], S22, 0xfcefa3f8); /* 30 */ 
GG (ref c, d, a, b, x[k+ 7], S23, 0x676f02d9); /* 31 */ 
GG (ref b, c, d, a, x[k+12], S24, 0x8d2a4c8a); /* 32 */ 

/* Round 3 */ 
HH (ref a, b, c, d, x[k+ 5], S31, 0xfffa3942); /* 33 */ 
HH (ref d, a, b, c, x[k+ 8], S32, 0x8771f681); /* 34 */ 
HH (ref c, d, a, b, x[k+11], S33, 0x6d9d6122); /* 35 */ 
HH (ref b, c, d, a, x[k+14], S34, 0xfde5380c); /* 36 */ 
HH (ref a, b, c, d, x[k+ 1], S31, 0xa4beea44); /* 37 */ 
HH (ref d, a, b, c, x[k+ 4], S32, 0x4bdecfa9); /* 38 */ 
HH (ref c, d, a, b, x[k+ 7], S33, 0xf6bb4b60); /* 39 */ 
HH (ref b, c, d, a, x[k+10], S34, 0xbebfbc70); /* 40 */ 
HH (ref a, b, c, d, x[k+13], S31, 0x289b7ec6); /* 41 */ 
HH (ref d, a, b, c, x[k+ 0], S32, 0xeaa127fa); /* 42 */ 
HH (ref c, d, a, b, x[k+ 3], S33, 0xd4ef3085); /* 43 */ 
HH (ref b, c, d, a, x[k+ 6], S34, 0x4881d05); /* 44 */ 
HH (ref a, b, c, d, x[k+ 9], S31, 0xd9d4d039); /* 45 */ 
HH (ref d, a, b, c, x[k+12], S32, 0xe6db99e5); /* 46 */ 
HH (ref c, d, a, b, x[k+15], S33, 0x1fa27cf8); /* 47 */ 
HH (ref b, c, d, a, x[k+ 2], S34, 0xc4ac5665); /* 48 */ 

/* Round 4 */ 
II (ref a, b, c, d, x[k+ 0], S41, 0xf4292244); /* 49 */ 
II (ref d, a, b, c, x[k+ 7], S42, 0x432aff97); /* 50 */ 
II (ref c, d, a, b, x[k+14], S43, 0xab9423a7); /* 51 */ 
II (ref b, c, d, a, x[k+ 5], S44, 0xfc93a039); /* 52 */ 
II (ref a, b, c, d, x[k+12], S41, 0x655b59c3); /* 53 */ 
II (ref d, a, b, c, x[k+ 3], S42, 0x8f0ccc92); /* 54 */ 
II (ref c, d, a, b, x[k+10], S43, 0xffeff47d); /* 55 */ 
II (ref b, c, d, a, x[k+ 1], S44, 0x85845dd1); /* 56 */ 
II (ref a, b, c, d, x[k+ 8], S41, 0x6fa87e4f); /* 57 */ 
II (ref d, a, b, c, x[k+15], S42, 0xfe2ce6e0); /* 58 */ 
II (ref c, d, a, b, x[k+ 6], S43, 0xa3014314); /* 59 */ 
II (ref b, c, d, a, x[k+13], S44, 0x4e0811a1); /* 60 */ 
II (ref a, b, c, d, x[k+ 4], S41, 0xf7537e82); /* 61 */ 
II (ref d, a, b, c, x[k+11], S42, 0xbd3af235); /* 62 */ 
II (ref c, d, a, b, x[k+ 2], S43, 0x2ad7d2bb); /* 63 */ 
II (ref b, c, d, a, x[k+ 9], S44, 0xeb86d391); /* 64 */ 

A+=a; 
B+=b; 
C+=c; 
D+=d; 

return new UInt32[]{A,B,C,D}; 

public static byte[] MD5Array(byte[] input){ 
MD5_Init(); 
UInt32[] block = MD5_Append(input); 
UInt32[] bits = MD5_Trasform(block); 

/* Encodes bits (UInt32[]) into output (byte[]). Assumes len is 
* a multiple of 4. 
*/ 
byte[] output=new byte[bits.Length*4]; 
for(int i=0,j=0;i<bits.Length;i++,j+=4){ 
output[j] = (byte)(bits[i] & 0xff); 
output[j+1] = (byte)((bits[i] >> 8) & 0xff); 
output[j+2] = (byte)((bits[i] >> 16) & 0xff); 
output[j+3] = (byte)((bits[i] >> 24) & 0xff); 

return output; 


public static string ArrayToHexString(byte[] array,bool uppercase){ 
string hexString=""; 
string format="x2"; 
if(uppercase){ 
format="X2"; 

foreach(byte b in array){ 
hexString += b.ToString(format); 

return hexString; 


public static string MDString(string message){ 
char[] c = message.ToCharArray(); 
byte[] b = new byte[c.Length]; 
for(int i=0;i<c.Length;i++){ 
b[i]=(byte)c[i]; 

byte[] digest = MD5Array(b); 
return ArrayToHexString(digest,false); 

public static string MDFile(string fileName){ 
FileStream fs=File.Open(fileName,FileMode.Open,FileAccess.Read); 
byte[] array=new byte[fs.Length]; 
fs.Read(array,0,(int)fs.Length); 
byte[] digest = MD5Array(array); 
fs.Close(); 
return ArrayToHexString(digest,false); 


public static string Test(string message){ 
return "rnMD5 (""+message+"") = " + MD5.MDString(message); 

public static string TestSuite(){ 
string s = ""; 
s+=Test(""); 
s+=Test("a"); 
s+=Test("abc"); 
s+=Test("message digest"); 
s+=Test("abcdefghijklmnopqrstuvwxyz"); 
s+=Test("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789"); 
s+=Test("12345678901234567890123456789012345678901234567890123456789012345678901234567890"); 
return s; 


發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章