1、下載zabbix_anget
下載地址爲：
http://www.zabbix.com/downloads/2.4.4/zabbix_agents_2.4.4.win.zip
2、修改zabbix_agentd.win.conf文件
將壓縮包解壓縮至c:\zabbix\
然後將c:\zabbix\conf\zabbix_agentd.win.conf修改
全文如下：
# This is config file for zabbix_agentd
# To get more information about ZABBIX, go http://www.zabbix.com
############ GENERAL PARAMETERS #################
# List of comma delimited IP addresses (or hostnames) of ZABBIX servers.
# No spaces allowed. First entry is used for sending active checks.
# Note that hostnames must resolve hostname->IP address and
# IP address->hostname.
Server=192.168.2.207
# Server port for sending active checks
#ServerPort=10051
# Unique hostname. Required for active checks.
Hostname=win2203
# Listen port. Default is 10050
#ListenPort=10050
# IP address to bind agent
# If missing, bind to all available IPs
#ListenIP=127.0.0.1
# Number of pre-forked instances of zabbix_agentd.
# Default value is 5
# This parameter must be between 1 and 16
StartAgents=5
# How often refresh list of active checks. 2 minutes by default.
#RefreshActiveChecks=120
# Disable active checks. The agent will work in passive mode listening server.
#DisableActive=1
# Enable remote commands for ZABBIX agent. By default remote commands disabled.
#EnableRemoteCommands=1
# Specifies debug level
# 0 - debug is not created
# 1 - critical information
# 2 - error information
# 3 - warnings (default)
# 4 - for debugging (produces lots of information)
DebugLevel=3
# Name of PID file
#PidFile=/var/tmp/zabbix_agentd.pid
# Name of log file.
# If not set, syslog will be used
LogFile=C:/zabbix/zabbix_agentd.log
# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.
#LogFileSize=1
# Spend no more than Timeout seconds on processing
# Must be between 1 and 30
Timeout=3
####### USER-DEFINED MONITORED PARAMETERS #######
# Format: UserParameter=<key>,<shell command>
# Note that shell command must not return empty string or EOL only
#UserParameter=system.test,who|wc -l
### Set of parameter for monitoring MySQL server (v3.23.42 and later)
### Change -u<username> and add -p<password> if required
#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l
#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"
#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"
#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"
#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"
#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"
#UserParameter=mysql.version,mysql -V
zabbix_agentd.win.conf全文，紅色加線部分需要修改，Server爲zabbix服務器端ip，hostname爲本機名，logfile爲日誌文件地址。
將zabbix_agentd.win.conf複製到 c:\zabbix\bin\win64\ 目錄下（32位系統複製到bin\win32目錄下）
在c:\zabbix新建一個zabbix_angetd.log文件。（日誌文件）
3、執行安裝命令
點開始》運行》cmd 打開命令行窗口
輸入c:\zabbix\bin\win64\zabbix_angetd -c zabbix_agentd.win.conf -i
4、啓動zabbix_agent服務
點開始》運行》services.msc打開服務窗口
啓動zabbix anget服務
