操作系統基於centos 5.3
#!/bin/bash
# BY kerryhu
# QQ:263205768
# MAIL:[email protected]
# BLOG:http://kerry.blog.51cto.com
# Please manual operation yum of before Operation.....
# yum install ntp vim-enhanced gcc gcc-c++ flex bison autoconf \
# automake bzip2-devel ncurses-devel libjpeg-devel libpng-devel \
# libtiff-devel freetype-devel pam-devel kernel netconfig
#============================更新系統時間===========================================
yum install ntp
ntpdate time.nist.gov
crontab -e
00 01 * * * /usr/sbin/ntpdate time.nist.gov
#============================安裝開源組件===========================================
sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers
#============================下載安裝包=============================================
cd /opt
wget http://sysoev.ru/nginx/nginx-0.8.34.tar.gz
wget http://www.php.net/get/php-5.2.13.tar.gz/from/this/mirror
wget http://php-fpm.org/downloads/php-5.2.13-fpm-0.5.13.diff.gz
wget http://mirrors.sohu.com/mysql/MySQL-5.5/mysql-5.5.2-m2.tar.gz
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.tar.gz
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz?modtime=1194463373&big_mirror=0"
wget http://pecl.php.net/get/memcache-2.2.5.tgz
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843&big_mirror=0"
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.01.tar.gz
wget http://bart.eaccelerator.net/source/0.9.6/eaccelerator-0.9.6.tar.bz2
wget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgz
wget http://blog.s135.com/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://pecl.php.net/get/imagick-2.3.0.tgz
#============================編譯安裝php所需的支持庫=================================
cd /opt
tar zxvf libiconv-1.13.tar.gz
cd libiconv-1.13/
./configure --prefix=/usr/local
make;make install
cd ../
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make;make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make;make install
cd ../../
tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make;make install
cd ../
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make;make install
cd ../
#=============================編譯安裝MySQL 5.5.2-m2=========================
cd /opt
mkdir -p /usr/local/mysql
useradd mysql -d /usr/local/mysql -s /sbin/nologin
tar zxvf mysql-5.5.2-m2.tar.gz
cd mysql-5.5.2-m2/
./configure --prefix=/usr/local/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=partition,innobase,myisammrg
make;make install
chown -R mysql:mysql /usr/local/mysql/
mkdir -p /data/mysql/data
mkdir -p /data/mysql/binlog
mkdir -p /data/mysql/relaylog
mkdir -p /data/mysql/mysql
chown -R mysql:mysql /data/mysql
/usr/local/mysql/bin/mysql_install_db --basedir=/usr/local/mysql --datadir=/data/mysql/data --user=mysql
#編輯mysql配置文件
vi /data/mysql/my.cnf
[client]
character-set-server = utf8
port = 3306
socket = /tmp/mysql.sock
[mysqld]
character-set-server = utf8
replicate-ignore-db = mysql
replicate-ignore-db = test
replicate-ignore-db = information_schema
user = mysql
port = 3306
socket = /tmp/mysql.sock
basedir = /usr/local/mysql
datadir = /data/mysql/data
log-error = /data/mysql/mysql_error.log
pid-file = /data/mysql/mysql.pid
open_files_limit = 10240
back_log = 600
max_connections = 5000
max_connect_errors = 6000
table_cache = 614
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 1M
join_buffer_size = 1M
thread_cache_size = 300
thread_concurrency = 8
query_cache_size = 512M
query_cache_limit = 2M
query_cache_min_res_unit = 2k
default-storage-engine = MyISAM
thread_stack = 192K
transaction_isolation = READ-COMMITTED
tmp_table_size = 246M
max_heap_table_size = 246M
long_query_time = 3
log-slave-updates
log-bin = /data/mysql/binlog/binlog
binlog_cache_size = 4M
binlog_format = MIXED
max_binlog_cache_size = 8M
max_binlog_size = 100M
relay-log-index = /data/mysql/relaylog/relaylog
relay-log-info-file = /data/mysql/relaylog/relaylog
relay-log = /data/mysql/relaylog/relaylog
expire_logs_days = 30
key_buffer_size = 256M
read_buffer_size = 1M
read_rnd_buffer_size = 16M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_repair_threads = 1
myisam_recover
interactive_timeout = 120
wait_timeout = 120
skip-name-resolve
master-connect-retry = 10
slave-skip-errors = 1032,1062,126,1114,1146,1048,1396
#master-host = 192.168.1.2
#master-user = username
#master-password = password
#master-port = 3306
server-id = 1
innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 512M
innodb_data_file_path = ibdata1:256M:autoextend
innodb_file_io_threads = 4
innodb_thread_concurrency = 8
innodb_flush_log_at_trx_commit = 2
innodb_log_buffer_size = 16M
innodb_log_file_size = 128M
innodb_log_files_in_group = 3
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
innodb_file_per_table = 0
#log-slow-queries = /data/mysql/slow.log
#long_query_time = 10
[mysqldump]
quick
max_allowed_packet = 32M
#設置mysql啓動文件
cp support-files/mysql.server /etc/rc.d/init.d/mysqld
sed -i 's#basedir=#basedir=/usr/local/mysql#' /data/mysql/my.cnf
sed -i 's#datadir=#datadir=/data/mysql/data#' /data/mysql/my.cnf
chmod 700 /etc/rc.d/init.d/mysqld
/etc/rc.d/init.d/mysqld start
chkconfig --add mysqld
chkconfig --level 2345 mysqld on
ln -s /usr/local/mysql/bin/mysql /sbin/mysql
ln -s /usr/local/mysql/bin/mysqladmin /sbin/mysqladmin
#設置root密碼（1q2w3e）
mysqladmin -u root password 1q2w3e
#配置庫文件搜索路徑
echo "/usr/local/mysql/lib/mysql" >> /etc/ld.so.conf
ldconfig
#添加/usr/local/mysql/bin到環境變量PATH中
export PATH=$PATH:/usr/local/mysql/bin
#添加mysql管理帳戶
mysql -h localhost -u root -p1q2w3e
msqyl> use mysql;
msqyl> grant all on *.* to 'kerry'@'172.16.16.150' identified by 'kerry1q2w3e';
msqyl> flush privileges;
msqyl> exit;
#==========================編譯安裝PHP（FastCGI模式）===============================
#編譯安裝php-5.2.13
cd /opt
tar zxvf php-5.2.13.tar.gz
gzip -cd php-5.2.13-fpm-0.5.13.diff.gz | patch -d php-5.2.13 -p1
cd php-5.2.13/
./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/php/etc/php.ini
cd ../
#編譯安裝PHP5擴展模塊
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make;make install
cd ../
tar jxvf eaccelerator-0.9.6.tar.bz2
cd eaccelerator-0.9.6/
/usr/local/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php/bin/php-config
make;make install
cd ../
tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql
make;make install
cd ../
tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make;make install
cd ../
tar zxvf imagick-2.3.0.tgz
cd imagick-2.3.0/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make;make install
cd ../
#手動修改php.ini文件
手工修改：查找/usr/local/php/etc/php.ini中的extension_dir = "./"
修改爲extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/"
並在此行後增加以下幾行，然後保存：
extension = "memcache.so"
extension = "pdo_mysql.so"
extension = "imagick.so"
再查找output_buffering = Off
修改爲output_buffering = On
#自動修改php.ini文件
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/php/etc/php.ini
sed -i "s#; always_populate_raw_post_data = On#always_populate_raw_post_data = On#g" /usr/local/php/etc/php.ini
#配置eAccelerator加速PHP：
mkdir -p /usr/local/eaccelerator_cache
vi /usr/local/php/etc/php.ini
[eaccelerator]
zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/usr/local/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
#創建www用戶和組，以及供blog.56diy.com和www.56diy.com兩個虛擬主機使用的目錄：
groupadd www
useradd -g www -s /sbin/nologin www
mkdir -p /data/www/blog.56diy.com
chmod +w /data/www/blog.56diy.com
chown -R www:www /data/www/blog.56diy.com
mkdir -p /data/www/www.56diy.com
chmod +w /data/www/www.56diy.com
chown -R www:www /data/www/www.56diy.com
#創建php-fpm配置文件（php-fpm是爲PHP打的一個FastCGI管理補丁，可以平滑變更php.ini配置而無需重啓php-cgi）：
mv /usr/local/php/etc/php-fpm.conf /usr/local/php/etc/php-fpm.conf.bak
vi /usr/local/php/etc/php-fpm.conf
#//輸入以下內容（如果您安裝 Nginx + PHP 用於程序調試，請將以下的<value name="display_errors">0</value>改爲<value name="display_errors">1</value>，以便顯示PHP錯誤信息，否則，Nginx 會報狀態爲500的空白錯誤頁）：
<?xml version="1.0" ?>
<configuration>
All relative paths in this config are relative to php's install prefix
<section name="global_options">
Pid file
<value name="pid_file">/usr/local/php/logs/php-fpm.pid</value>
Error log file
<value name="error_log">/usr/local/php/logs/php-fpm.log</value>
Log level
<value name="log_level">notice</value>
When this amount of php processes exited with SIGSEGV or SIGBUS ...
<value name="emergency_restart_threshold">10</value>
... in a less than this interval of time, a graceful restart will be initiated.
Useful to work around accidental curruptions in accelerator's shared memory.
<value name="emergency_restart_interval">1m</value>
Time limit on waiting child's reaction on signals from master
<value name="process_control_timeout">5s</value>
Set to 'no' to debug fpm
<value name="daemonize">yes</value>
</section>
<workers>
<section name="pool">
Name of pool. Used in logs and stats.
<value name="name">default</value>
Address to accept fastcgi requests on.
Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
<value name="listen_address">127.0.0.1:9000</value>
<value name="listen_options">
Set listen(2) backlog
<value name="backlog">-1</value>
Set permissions for unix socket, if one used.
In Linux read/write permissions must be set in order to allow connections from web server.
Many BSD-derrived systems allow connections regardless of permissions.
<value name="owner"></value>
<value name="group"></value>
<value name="mode">0666</value>
</value>
Additional php.ini defines, specific to this pool of workers.
<value name="php_defines">
<value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
<value name="display_errors">0</value>
</value>
Unix user of processes
<value name="user">www</value>
Unix group of processes
<value name="group">www</value>
Process manager settings
<value name="pm">
Sets style of controling worker process count.
Valid values are 'static' and 'apache-like'
<value name="style">static</value>
Sets the limit on the number of simultaneous requests that will be served.
Equivalent to Apache MaxClients directive.
Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
Used with any pm_style.
<value name="max_children">128</value>
Settings group for 'apache-like' pm style
<value name="apache_like">
Sets the number of server processes created on startup.
Used only when 'apache-like' pm_style is selected
<value name="StartServers">20</value>
Sets the desired minimum number of idle server processes.
Used only when 'apache-like' pm_style is selected
<value name="MinSpareServers">5</value>
Sets the desired maximum number of idle server processes.
Used only when 'apache-like' pm_style is selected
<value name="MaxSpareServers">35</value>
</value>
</value>
The timeout (in seconds) for serving a single request after which the worker process will be terminated
Should be used when 'max_execution_time' ini option does not stop script execution for some reason
'0s' means 'off'
<value name="request_terminate_timeout">0s</value>
The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
'0s' means 'off'
<value name="request_slowlog_timeout">0s</value>
The log file for slow requests
<value name="slowlog">logs/slow.log</value>
Set open file desc rlimit
<value name="rlimit_files">65535</value>
Set max core size rlimit
<value name="rlimit_core">0</value>
Chroot to this directory at the start, absolute path
<value name="chroot"></value>
Chdir to this directory at the start, absolute path
<value name="chdir"></value>
Redirect workers' stdout and stderr into main error log.
If not set, they will be redirected to /dev/null, according to FastCGI specs
<value name="catch_workers_output">yes</value>
How much requests each process should execute before respawn.
Useful to work around memory leaks in 3rd party libraries.
For endless request processing please specify 0
Equivalent to PHP_FCGI_MAX_REQUESTS
<value name="max_requests">1024</value>
Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
Makes sense only with AF_INET listening socket.
<value name="allowed_clients">127.0.0.1</value>
Pass environment variables like LD_LIBRARY_PATH
All $VARIABLEs are taken from current environment
<value name="environment">
<value name="HOSTNAME">$HOSTNAME</value>
<value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
<value name="TMP">/tmp</value>
<value name="TMPDIR">/tmp</value>
<value name="TEMP">/tmp</value>
<value name="OSTYPE">$OSTYPE</value>
<value name="MACHTYPE">$MACHTYPE</value>
<value name="MALLOC_CHECK_">2</value>
</value>
</section>
</workers>
</configuration>
#啓動php-cgi進程，監聽127.0.0.1的9000端口，<value name="max_children">128</value>進程數爲128（如果服務器內存小於3GB，可以只開啓64個進程），用戶爲www：
ulimit -SHn 65535
/usr/local/php/sbin/php-fpm start
#//注：/usr/local/php/sbin/php-fpm還有其他參數，包括：start|stop|quit|restart|reload|logrotate，修改php.ini後不重啓php-cgi，重新加載配置文件使用reload。
#==================================安裝Nginx 0.8.34 =========================================
#安裝Nginx所需的pcre庫：
cd /opt
tar zxvf pcre-8.01.tar.gz
cd pcre-8.01/
./configure
make;make install
cd ../
#安裝Nginx
tar zxvf nginx-0.8.34.tar.gz
cd nginx-0.8.34/
./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module
make;make install
cd ../
#創建Nginx日誌目錄
mkdir -p /data/logs/blog.56diy.com
chmod +w /data/logs/blog.56diy.com
chown -R www:www /data/logs/blog.56diy.com
mkdir -p /data/logs/www.56diy.com
chmod +w /data/logs/www.56diy.com
chown -R www:www /data/logs/www.56diy.com
#創建Nginx配置文件
mv /usr/local/nginx/conf/nginx.conf /usr/local/nginx/conf/nginx.conf.bak
vi /usr/local/nginx/conf/nginx.conf
user www www;
worker_processes 8;
error_log /data/logs/nginx_error.log crit;
pid /usr/local/nginx/nginx.pid;
#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 65535;
events
{
use epoll;
worker_connections 65535;
}
http
{
include mime.types;
default_type application/octet-stream;
#charset gb2312;
server_names_hash_bucket_size 128;
client_header_buffer_size 32k;
large_client_header_buffers 4 32k;
client_max_body_size 8m;
sendfile on;
tcp_nopush on;
keepalive_timeout 60;
tcp_nodelay on;
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 128k;
gzip on;
gzip_min_length 1k;
gzip_buffers 4 16k;
gzip_http_version 1.0;
gzip_comp_level 2;
gzip_types text/plain application/x-javascript text/css application/xml;
gzip_vary on;
#limit_zone crawler $binary_remote_addr 10m;
server
{
listen 80;
server_name blog.56diy.com;
index index.html index.htm index.php;
root /data/www/blog.56diy.com;
#limit_conn crawler 20;
location ~ .*\.(php|php5)?$
{
#fastcgi_pass unix:/tmp/php-cgi.sock;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
{
expires 30d;
}
location ~ .*\.(js|css)?$
{
expires 1h;
}
log_format access '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" $http_x_forwarded_for';
access_log /data/logs/blog.56diy.com/access.log access;
}
server
{
listen 80;
server_name www.56diy.com;
index index.html index.htm index.php;
root /data/www/www.56diy.com;
location ~ .*\.(php|php5)?$
{
#fastcgi_pass unix:/tmp/php-cgi.sock;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fcgi.conf;
}
log_format wwwlogs '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" $http_x_forwarded_for';
access_log /data/logs/www.56diy.com/wwwlogs.log wwwlogs;
}
server
{
listen 80;
server_name status.www.56diy.com;
location / {
stub_status on;
access_log off;
}
}
}
#在/usr/local/nginx/conf/目錄中創建fcgi.conf文件
vi /usr/local/nginx/conf/fcgi.conf
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;
#啓動Nginx
ulimit -SHn 65535
/usr/local/nginx/sbin/nginx
#配置開機自動啓動Nginx + PHP
vi /etc/rc.local
ulimit -SHn 65535
/usr/local/php/sbin/php-fpm start
/usr/local/nginx/sbin/nginx
#============================安全優化================================================
#優化Linux內核參數
mv /etc/sysctl.conf /etc/sysctl.conf.bak
vi /etc/sysctl.conf
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_recycle = 1
#net.ipv4.tcp_tw_len = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 120
net.ipv4.ip_local_port_range = 1024 65535
kernel.shmmax = 128000000
#使配置立即生效
/sbin/sysctl -p
#關閉不用服務
vi /etc/service_stop.sh
#!/bin/bash
# This script is used to del some service is not used on the server
# Create by kerryhu
# Date 2010-03-23
# Mail [email protected]
service microcode_ctl stop
chkconfig --level 235 microcode_ctl off
service gpm stop
chkconfig --level 235 gpm off
service kudzu stop
chkconfig --level 235 kudzu off
service netfs stop
chkconfig --level 235 netfs off
service rawdevices stop
chkconfig --level 235 rawdevices off
service saslauthd stop
chkconfig --level 235 saslauthd off
service keytable stop
chkconfig --level 235 keytable off
service mdmonitor stop
chkconfig --level 235 mdmonitor off
service atd stop
chkconfig --level 235 atd off
service irda stop
chkconfig --level 235 irda off
service psacct stop
chkconfig --level 235 psacct off
service apmd stop
chkconfig --level 235 apmd off
service isdn stop
chkconfig --level 235 isdn off
service iptables stop
chkconfig --level 235 iptables off
service ip6tables stop
chkconfig --level 235 ip6tables off
service pcmcia stop
chkconfig --level 235 pcmcia off
service sendmail stop
chkconfig --level 235 sendmail off
service smartd stop
chkconfig --level 235 smartd off
service autofs stop
chkconfig --level 235 autofs off
service netdump stop
chkconfig --level 235 netdump off
service portmap stop
chkconfig --level 235 portmap off
service nfs stop
chkconfig --level 235 nfs off
service nfslock stop
chkconfig --level 235 nfslock off
service snmptrapd stop
chkconfig --level 235 snmptrapd off
service rhnsd stop
chkconfig --level 235 rhnsd off
service xinetd stop
chkconfig --level 235 xinetd off
service cups stop
chkconfig --level 235 cups off
service snmpd stop
chkconfig --level 235 snmpd off
service vncserver stop
chkconfig --level 235 vncserver off
service hpoj stop
chkconfig --level 235 hpoj off
service xfs stop
chkconfig --level 235 xfs off
service ntpd stop
chkconfig --level 235 ntpd off
service winbind stop
chkconfig --level 235 winbind off
service smb stop
chkconfig --level 235 smb off
service dc_client stop
chkconfig --level 235 dc_client off
service dc_server stop
chkconfig --level 235 dc_server off
service httpd stop
chkconfig --level 235 httpd off
service aep1000 stop
chkconfig --level 235 aep1000 off
service bcm5820 stop
chkconfig --level 235 bcm5820 off
service squid stop
chkconfig --level 235 squid off
service named stop
chkconfig --level 235 named off
service tux stop
chkconfig --level 235 tux off
service vsftpd stop
chkconfig --level 235 vsftpd off
service avahi-daemon stop
chkconfig --level 235 avahi-daemon off
service bluetooth stop
chkconfig --level 235 bluetooth off
service firstboot stop
chkconfig --level 235 firstboot off
service lvm2-monitor stop
chkconfig --level 235 lvm2-monitor off
service mcstrans stop
chkconfig --level 235 mcstrans off
service pcscd stop
chkconfig --level 235 pcscd off
service restorecond stop
chkconfig --level 235 restorecond off
service rpcgssd stop
chkconfig --level 235 rpcgssd off
service rpcidmapd stop
chkconfig --level 235 rpcidmapd off
chmod +x /root/service_stop.sh
#執行腳本關閉不需要的服務
/root/service_stop.sh
#iptables設置
vi /root/iptables.sh
#echo "Starting kerryhu-iptables rules..."
#!/bin/bash
#this is a common firewall created by 2010-3-27
#define some variable
IPT=/sbin/iptables
CONNECTION_TRACKING="1"
INTERNET="eth0"
CLASS_A="10.0.0.0/8"
CLASS_B="172.16.0.0/12"
CLASS_C="192.168.0.0/16"
CLASS_D_MULTICAST="224.0.0.0/4"
CLASS_E_RESERVED_NET="240.0.0.0/5"
BROADCAST_SRC="0.0.0.0"
BROADCAST_DEST="255.255.255.255"
LOOPBACK_INTERFACE="lo"
#Remove any existing rules
$IPT -F
$IPT -X
#setting default firewall policy
$IPT --policy OUTPUT DROP
$IPT --policy FORWARD DROP
$IPT -P INPUT DROP
#stop firewall
if [ "$1" = "stop" ]
then
echo "Filewall completely stopped!no firewall running!"
exit 0
fi
#setting for loopback interface
$IPT -A INPUT -i lo -j ACCEPT
$IPT -A OUTPUT -o lo -j ACCEPT
# Stealth Scans and TCP State Flags
# All of the bits are cleared
$IPT -A INPUT -p tcp --tcp-flags ALL NONE -j DROP
# SYN and FIN are both set
$IPT -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP
# SYN and RST are both set
$IPT -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
# FIN and RST are both set
$IPT -A INPUT -p tcp --tcp-flags FIN,RST FIN,RST -j DROP
# FIN is the only bit set, without the expected accompanying ACK
$IPT -A INPUT -p tcp --tcp-flags ACK,FIN FIN -j DROP
# PSH is the only bit set, without the expected accompanying ACK
$IPT -A INPUT -p tcp --tcp-flags ACK,PSH PSH -j DROP
# URG is the only bit set, without the expected accompanying ACK
$IPT -A INPUT -p tcp --tcp-flags ACK,URG URG -j DROP
# Using Connection State to By-pass Rule Checking
if [ "$CONNECTION_TRACKING" = "1" ]; then
$IPT -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A INPUT -m state --state INVALID -j DROP
$IPT -A OUTPUT -m state --state INVALID -j DROP
fi
##################################################################
# Source Address Spoofing and Other Bad Addresses
# Refuse spoofed packets pretending to be from
# the external interface.s IP address
# Refuse packets claiming to be from a Class A private network
$IPT -A INPUT -i $INTERNET -s $CLASS_A -j DROP
# Refuse packets claiming to be from a Class B private network
$IPT -A INPUT -i $INTERNET -s $CLASS_B -j DROP
# Refuse packets claiming to be from a Class C private network
$IPT -A INPUT -i $INTERNET -s $CLASS_C -j DROP
$IPT -A INPUT -i $INTERNET -s 0.0.0.0/8 -j DROP
$IPT -A INPUT -i $INTERNET -s 169.254.0.0/16 -j DROP
$IPT -A INPUT -i $INTERNET -s 192.0.2.0/24 -j DROP
###################################################################
#setting access rules
#enable ssh connect
#$IPT -A OUTPUT -o $INTERNET -p tcp -d 61.177.7.1 -j ACCEPT
#時鐘同步
$IPT -A OUTPUT -d 192.43.244.18 -j ACCEPT
#允許ping出
$IPT -A OUTPUT -p icmp -j ACCEPT
$IPT -A OUTPUT -o $INTERNET -p udp --dport 53 -j ACCEPT
$IPT -A OUTPUT -o $INTERNET -p tcp --dport 80 -j ACCEPT
$IPT -A INPUT -i $INTERNET -p tcp -m mac --mac-source 00:02:3F:EB:E2:01 --dport 22 -j ACCEPT
$IPT -A INPUT -i $INTERNET -p tcp --dport 443 -j ACCEPT
$IPT -A INPUT -i $INTERNET -p tcp --dport 80 -j ACCEPT
$IPT -A INPUT -i $INTERNET -p tcp -s 127.0.0.1 --dport 3306 -j ACCEPT
$IPT -A INPUT -i $INTERNET -p udp --dport 123 -j ACCEPT
chmod +x /root/iptables.sh
echo "/root/iptables.sh" >> /etc/rc.local
#=======================在不停止Nginx服務的情況下平滑變更Nginx配置======================================
1、修改/usr/local/nginx/conf/nginx.conf配置文件後，請執行以下命令檢查配置文件是否正確：
/usr/local/nginx/sbin/nginx -t
/*
如果屏幕顯示以下兩行信息，說明配置文件正確：
the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
the configuration file /usr/local/nginx/conf/nginx.conf was tested successfully
*/
2、平滑重啓：
①、對於Nginx 0.8.x版本，現在平滑重啓Nginx配置非常簡單，執行以下命令即可：
/usr/local/nginx/sbin/nginx -s reload
②、對於Nginx 0.8.x之前的版本，平滑重啓稍微麻煩一些，按照以下步驟進行即可。輸入以下命令查看Nginx主進程號：
ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'
屏幕顯示的即爲Nginx主進程號，例如：
6302
這時，執行以下命令即可使修改過的Nginx配置文件生效：
kill -HUP 6302
#或者無需這麼麻煩，找到Nginx的Pid文件：
kill -HUP `cat /usr/local/nginx/nginx.pid`
#===========================編寫每天定時切割Nginx日誌的腳本==============================================
vi /usr/local/nginx/sbin/cut_nginx_log.sh
#!/bin/bash
# This script run at 00:00
# The Nginx logs path
logs_path_blog="/data/logs/blog.56diy.com/"
logs_path_www="/data/logs/www.56diy.com/"
mkdir -p ${logs_path_blog}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path_blog}access.log ${logs_path_blog}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
mkdir -p ${logs_path_www}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path_www}wwwlogs.log ${logs_path_www}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/wwwlogs_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/nginx/nginx.pid`
chmod +x /usr/local/nginx/sbin/cut_nginx_log.sh
#添加計劃任務，每天凌晨00:00切割nginx訪問日誌
crontab -e
00 00 * * * /bin/bash /usr/local/nginx/sbin/cut_nginx_log.sh
#====================================故障排查===========================================
#故障1
/usr/local/php/sbin/php-fpm start
Starting php_fpm eAccelerator: Could not allocate 67108864 bytes, the maximum size the kernel allows is 33554432 bytes. Lower the amount of memory request or increase the limit in /proc/sys/kernel/shmmax.
PHP Warning: [eAccelerator] Can not create shared memory area in Unknown on line 0
PHP Fatal error: Unable to start eAccelerator module in Unknown on line 0
failed
#說明
php.ini中設置的eAccelerator，eaccelerator.shm_size="64"，解釋：eaccelerator可使用的共享內存大小(單位爲MB)，即64M
在Linux下，單個進程的最大內存使用量受/proc/sys/kernel/shmmax中設置的數字限制(單位爲字節) /proc/sys/kernel/shmmax = 33554432 （32M）
臨時更改該值：
echo 128000000 > /proc/sys/kernel/shmmax
或者
vi /etc/sysctl.conf
kernel.shmmax = 128000000
syscatl -p