注意由於supervisor不能監控後臺程序,所以command執行的命令都需要放前臺執行，比如nginx：command = /usr/local/bin/nginx -g ‘daemon off;’
說下這個工具的好處：
管理你的進程，異常終止自動重啓服務進程
機器關機，開機也自動啓動服務進程
集中管理，可以批量重啓服務進程
安裝supervisor
yum install epel-release
yum install -y supervisorsystemctl enable supervisord 開機啓動
systemctl start supervisord 啓動服務
編輯配置文件/etc/supervisord.conf
; Sample supervisor config file.
[unix_http_server]
file=/var/run/supervisor/supervisor.sock ; (the path to the socket file)
;chmod=0700 ; sockef file mode (default 0700)
;chown=nobody:nogroup ; socket file uid:gid owner
;username=user ; (default is no username (open server))
;password=123 ; (default is no password (open server))
[inet_http_server] ; inet (TCP) server disabled by default
port=0.0.0.0:9001 ; (ip_address:port specifier, *:port for all iface)——修改偵聽端口，可以web管理
username=root ; (default is no username (open server))——web管理用戶名
password=123 ; (default is no password (open server))——web管理密碼
[supervisord]
logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10 ; (num of main logfile rotation backups;default 10)
loglevel=info ; (log level;default info; others: debug,warn,trace)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false ; (start in foreground if true;default false)
minfds=1024 ; (min. avail startup file descriptors;default 1024)
minprocs=200 ; (min. avail process descriptors;default 200)
;umask=022 ; (process file creation umask;default 022)
;user=chrism ; (default is current user, required if root)
;identifier=supervisor ; (supervisord identifier, default is 'supervisor')
;directory=/tmp ; (default is not to cd during start)
;nocleanup=true ; (don't clean up tempfiles at start;default false)
;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP)
;environment=KEY=value ; (key value pairs to add to environment)
;strip_ansi=false ; (strip ansi escape codes in logs; def. false)
; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
[supervisorctl]
serverurl=unix:///var/run/supervisor/supervisor.sock ; use a unix:// URL for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris ; should be same as http_username if set
;password=123 ; should be same as http_password if set
;prompt=mysupervisor ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history ; use readline history if available
; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.
;[program:theprogramname]
;command=/bin/cat ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=999 ; the relative start priority (default 999)
;autostart=true ; start at supervisord start (default: true)
;autorestart=true ; retstart at unexpected quit (default: true)
;startsecs=10 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A=1,B=2 ; process environment additions (def no adds)
;serverurl=AUTO ; override serverurl computation (childutils)
; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more 'real'
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.
;[eventlistener:theeventlistenername]
;command=/bin/eventlistener ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;events=EVENT ; event notif. types to subscribe to (req'd)
;buffer_size=10 ; event buffer queue size (default 10)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=-1 ; the relative start priority (default -1)
;autostart=true ; start at supervisord start (default: true)
;autorestart=unexpected ; restart at unexpected quit (default: unexpected)
;startsecs=10 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A=1,B=2 ; process environment additions
;serverurl=AUTO ; override serverurl computation (childutils)
; The below sample group section shows all possible group values,
; create one or more 'real' group: sections to create "heterogeneous"
; process groups.
;[group:thegroupname]
;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions
;priority=999 ; the relative start priority (default 999)
; The [include] section can just contain the "files" setting. This
; setting can list multiple files (separated by whitespace or
; newlines). It can also contain wildcards. The filenames are
; interpreted as relative to this file. Included files *cannot*
; include files themselves.
[program:redis] ——添加一個redis啓動服務
directory = /root/redis-2.8.17/
command = /root/redis-2.8.17/src/./redis-server /root/redis-2.8.17/redis.conf
autostart = true ;在supervisord啓動的時候也啓動
startsecs = 5 ;啓動5秒後沒有異常退出，就當作已經正常啓動了
priority=200 **;優先級 數字越小，越先執行**
autorestart = true ;程序異常退出後自動重啓
startretries = 3 ;啓動失敗自動重試次數，默認是3
user = root ;哪個用戶啓動
redirect_stderr = true ;把stderr重定向到stdout，默認false
stdout_logfile_maxbytes = 20MB ;stdout日誌文件大小，默認50MB
stdout_logfile_backups = 20
stdout_logfile = /etc/supervisord.d/redis.log——輸出日誌
[program:logjar]——啓動jar包 注意java 環境變量問題，使用jdk指定目錄
directory = /root/
command = /usr/local/java/jdk1.8.0_171/bin/java -jar /root/log-api-imp-0.0.1-SNAPSHOT.jar
autostart = true ;在supervisord啓動的時候也啓動
startsecs = 5 ;啓動5秒後沒有異常退出，就當作已經正常啓動了
priority=300
autorestart = true ;程序異常退出後自動重啓
startretries = 3 ;啓動失敗自動重試次數，默認是3
user = root ;哪個用戶啓動
redirect_stderr = true ;把stderr重定向到stdout，默認false
stdout_logfile_maxbytes = 20MB ;stdout日誌文件大小，默認50MB
stdout_logfile_backups = 20
stdout_logfile = /etc/supervisord.d/logjar.log
[program:zookeeper]
directory = /root/zookeeper/bin/
command = /root/zookeeper/bin/zkServer.sh start-foreground ——加上此參數，然zookeeper到前臺運行，否則報錯
autostart = true ;在supervisord啓動的時候也啓動
startsecs = 5 ;啓動5秒後沒有異常退出，就當作已經正常啓動了
priority=100
autorestart = true ;程序異常退出後自動重啓
startretries = 3 ;啓動失敗自動重試次數，默認是3
user = root ;哪個用戶啓動
redirect_stderr = true ;把stderr重定向到stdout，默認false
stdout_logfile_maxbytes = 20MB ;stdout日誌文件大小，默認50MB
stdout_logfile_backups = 20
stdout_logfile = /etc/supervisord.d/zookeeper.log
environment=JAVA_HOME="/usr/local/java/jdk1.8.0_171"——指向javahome環境變量
;[include]
;files = /etc/supervisord.d/*.ini踩坑：
1.注意;分號是註釋，一開始配置沒搞明白，發現怎麼都無法登陸web管理
2.zookeeper 執行需要環境變量
3.使用[include]無法識別配置文件，我把redis、jar、zookeeper三個配置文件拷貝到/etc/supervisord.conf下，才執行成功，啓動服務的時候是用的這個配置文件，下圖
web管理頁面
supervisor也可以使用命令管理
supervisorctl
status #查看程序狀態
stop name #關閉name程序
start name #啓動name程序
restart name # 重啓name程序
reread ＃讀取有更新的配置文件，不會啓動新添加的程序
update #重啓配置文件修改過的程序
