配置VLAN

配置VLAN
創建vlan2並進入視圖 <H3C> system-view [H3C] vlan 2  # 指定VLAN2 的描述字符串爲home。 [H3C-vlan2] description home  # 向VLAN2 中加入端口Ethernet1/0/1 和Ethernet1/0/2。 [H3C-vlan2] port Ethernet 1/0/1 Ethernet 1/0/2 # 創建VLAN3 並進入其視圖。 [H3C-vlan2] vlan 3  # 向VLAN3 中加入端口Ethernet1/0/3 和Ethernet1/0/4。  [H3C-vlan3] port Ethernet 1/0/3 Ethernet 1/0/4
# 配置VLAN 接口2 的IP 地址。
<H3C> system-view  [H3C] interface Vlan-interface 2  [H3C-Vlan-interface2] ip address 129.2.2.1 255.255.255.0 # 配置VLAN 接口3 的IP 地址。 <H3C> system-view  [H3C] interface Vlan-interface 3  [H3C-Vlan-interface3] ip address 192.2.2.1 255.255.255.0  配置好後，交換機上ping各網關之間應該能夠互通，在配置好的端口上連上pc設置好ip如pc1接Ethernet1/0/1 設置ip：129.2.2.2 255.255.255.0 129.2.2.1 Pc2接Ethernet 1/0/3 設置ip：192.2.2.2 255.255.255.0 192.2.2.1 則pc1和pc2能互通  S3600三層交換機端口限速配置： [H3C]interface Ethernet1/0/4 
[H3C-Ethernet1/0/4]line-rate outbound 1024
[H3C-Ethernet1/0/4]broadcast-suppression pps 1024
[H3C-Ethernet1/0/4]multicast-suppression pps 1024
[H3C-Ethernet1/0/4]unicast-suppression pps 1024
[H3C-Ethernet1/0/4]flow-control