Mongodb 操作指南
服務器:
192.168.x.x(主) 192.168.x.x 192.168.x.x 192.168.x.x
刪除數據:
刪除”dick” : “age123” 數據
db.test_ttlsa_com.remove({“dick”:”age123”})
刪除所有數據
db.test_ttlsa_com.count()
2
db.test_ttlsa_com.remove({})
db.test_ttlsa_com.count()
0
刪除集合
show collections
system.indexs
test_ttlsa_com
db.test_ttlsa_com.drop()
true
show collections
system.indexes
刪除整個數據庫
show dbs
admin 0.203GB
intherDB 31.938GB
local 2.077GB
test 0.203GB
db
admin
db.admin.getDB()
admin
show collections
system.backup_users
system.indexes
system.new_users
system.users
system.version
db.dropDatabase()
{ “dropped” : “intherDB”, “ok” : 1 }
db
admin 0.203GB
local 2.077GB
test 0.203GB
在刪除整個數據庫前,要謹慎,執行db命令查看當前使用的數據庫,可確保誤刪除,造成數據的丟失,是個好習慣。
登陸:
/data/mongodb/mongodb2.6.3/bin/mongo 192.168.x.x:27017/admin-uroot –pInth
顯示數據庫列表:
show dbs;
查看節點狀態和主從
rs.status();
顯示當前數據庫的集合
show collections;
顯示當前用戶:
show users;
查看當前使用的數據庫
db.getName();
刪除當前使用數據庫
db.dropDatabase();
切換/創建數據庫
use yourDB;
從指定主機上克隆數據庫
db.cloneDatabase(“127.0.0.1”);
從指定的機器上覆制指定的數據庫到某個數據庫
db.copyDatabase(“mydb”,”temp”,”127.0.0.1”);將本機的mydb的數據複製到temp數據庫中
修復當前數據庫
Db.repairDatabase();
當前db版本:
db.version();
查看當前db的連接機器地址:
db.getMongo();
用戶相關:
添加一個用戶:
db.addUser(“name”);
db.addUser(“userName”,”pwd123”,true);添加用戶、設置密碼、是否只讀
數據庫認證、安全模式
db.auth(“userName”,”123”);
顯示當前所有用戶:
show users;
刪除用戶:
db.removeUser(“userName”);
其他
查詢之前的錯誤信息
db.getPrevError();
清楚錯誤記錄
db.resetError();
查看聚集集合基本信息
1、查看幫助 db.yourColl.help();
2、查詢當前集合的數據條數 db.yourColl.count();
3、查看數據空間大小db.userInfo.dataSize();
4、得到當前聚集集合所在的dbdb.userInfo.getDB();
5、得到當前聚集的狀態db.userInfo.stats();
6、得到聚集集合總大小db.userInfo.totalSize();
7、聚集集合儲存空間大小db.userInfo.storageSize();
8、Shard版本信息 db.userInfo.getShardVersion()
9、聚集集合重命名db.userInfo.renameCollection("users"); 將userInfo重命名爲users
10、刪除當前聚集集合db.userInfo.drop();
聚集集合查詢
1、查詢所有記錄
db.userInfo.find();
相當於:select* from userInfo;
默認每頁顯示20條記錄,當顯示不下的情況下,可以用it迭代命令查詢下一頁數據。注意:鍵入it命令不能帶“;”
但是你可以設置每頁顯示數據的大小,用DBQuery.shellBatchSize= 50;這樣每頁就顯示50條記錄了。
2、查詢去掉後的當前聚集集合中的某列的重複數據
db.userInfo.distinct("name");
會過濾掉name中的相同數據
相當於:select distict name from userInfo;
3、查詢age = 22的記錄
db.userInfo.find({"age": 22});
相當於: select * from userInfo where age = 22;
4、查詢age > 22的記錄
db.userInfo.find({age: {$gt: 22}});
相當於:select * from userInfo where age >22;
5、查詢age < 22的記錄
db.userInfo.find({age: {$lt: 22}});
相當於:select * from userInfo where age <22;
6、查詢age >= 25的記錄
db.userInfo.find({age: {$gte: 25}});
相當於:select * from userInfo where age >= 25;
7、查詢age <= 25的記錄
db.userInfo.find({age: {$lte: 25}});
8、查詢age >= 23 並且 age <=26
db.userInfo.find({age: {$gte: 23, $lte:26}});
9、查詢name中包含 mongo的數據
db.userInfo.find({name: /mongo/});
//相當於%%
select * from userInfo where name like‘%mongo%’;
10、查詢name中以mongo開頭的
db.userInfo.find({name: /^mongo/});
select * from userInfo where name like‘mongo%’;
11、查詢指定列name、age數據
db.userInfo.find({}, {name: 1, age: 1});
相當於:select name, age from userInfo;
當然name也可以用true或false,當用ture的情況下河name:1效果一樣,如果用false就是排除name,顯示name以外的列信息。
12、查詢指定列name、age數據, age >25
db.userInfo.find({age: {$gt: 25}}, {name:1, age: 1});
相當於:select name, age from userInfo where age >25;
13、按照年齡排序
升序:db.userInfo.find().sort({age: 1});
降序:db.userInfo.find().sort({age: -1});
14、查詢name = zhangsan,age = 22的數據
db.userInfo.find({name: 'zhangsan', age:22});
相當於:select * from userInfo where name = ‘zhangsan’ and age = ‘22’;
15、查詢前5條數據
db.userInfo.find().limit(5);
相當於:selecttop 5 * from userInfo;
16、查詢10條以後的數據
db.userInfo.find().skip(10);
相當於:select * from userInfo where id not in (
selecttop 10 * from userInfo
);
17、查詢在5-10之間的數據
db.userInfo.find().limit(10).skip(5);
可用於分頁,limit是pageSize,skip是第幾頁*pageSize
18、or與 查詢
db.userInfo.find({$or: [{age: 22}, {age:25}]});
相當於:select * from userInfo where age = 22 or age = 25;
19、查詢第一條數據
db.userInfo.findOne();
相當於:selecttop 1 * from userInfo;
db.userInfo.find().limit(1);
20、查詢某個結果集的記錄條數
db.userInfo.find({age: {$gte:25}}).count();
相當於:select count(*) from userInfo where age >= 20;
21、按照某列進行排序
db.userInfo.find({sex: {$exists:true}}).count();
相當於:select count(sex) from userInfo;
索引
1、創建索引
db.userInfo.ensureIndex({name: 1});
db.userInfo.ensureIndex({name: 1, ts: -1});
2、查詢當前聚集集合所有索引
db.userInfo.getIndexes();
3、查看總索引記錄大小
db.userInfo.totalIndexSize();
4、讀取當前集合的所有index信息
db.users.reIndex();
5、刪除指定索引
db.users.dropIndex("name_1");
6、刪除所有索引索引
db.users.dropIndexes();
修改、添加、刪除集合數據
1、添加
db.users.save({name: ‘zhangsan’, age: 25,sex: true});
添加的數據的數據列,沒有固定,根據添加的數據爲準
2、修改
db.users.update({age: 25}, {$set: {name:'changeName'}}, false, true);
相當於:update users set name = ‘changeName’ where age =25;
db.users.update({name: 'Lisi'}, {$inc: {age:50}}, false, true);
相當於:update users set age = age + 50 where name = ‘Lisi’;
db.users.update({name: 'Lisi'}, {$inc:{age: 50}, $set: {name: 'hoho'}}, false, true);
相當於:update users set age = age + 50, name = ‘hoho’ where name= ‘Lisi’;
3、刪除
db.users.remove({age: 132});
4、查詢修改刪除
db.users.findAndModify({
query: {age: {$gte: 25}},
sort: {age: -1},
update: {$set: {name: 'a2'}, $inc: {age: 2}},
remove: true
});
db.runCommand({ findandmodify :"users",
query: {age: {$gte: 25}},
sort: {age: -1},
update: {$set: {name: 'a2'}, $inc: {age: 2}},
remove: true
});
update 或 remove 其中一個是必須的參數; 其他參數可選。
參數 詳解 默認值
Query 查詢過濾條件 {}
Sort 如果多個文檔符合查詢過濾條件,將以該參數指定的排列方式選擇出排在首位的對象,該對象將被操作 {}
Remove 若爲true,被選中對象將在返回前被刪 N/A
Update 一個 修改器對象 N/A
New 若爲true,將返回修改後的對象而不是原始對象。在刪除操作中,該參數被忽略。 false
Fields 參見Retrieving a Subsetof Fields (1.5.0+) All fields
Upsert 創建新對象若查詢結果爲空。 示例 (1.5.4+) false
語句塊操作
1、簡單Hello World
print("Hello World!");
這種寫法調用了print函數,和直接寫入"Hello World!"的效果是一樣的;
2、將一個對象轉換成json
tojson(new Object());
tojson(new Object('a'));
3、循環添加數據
> for (var i = 0; i < 30; i++) {
... db.users.save({name: "u_" +i, age: 22 + i, sex: i % 2});
... };
這樣就循環添加了30條數據,同樣也可以省略括號的寫法
> for (var i = 0; i < 30; i++)db.users.save({name: "u_" + i, age: 22 + i, sex: i % 2});
也是可以的,當你用db.users.find()查詢的時候,顯示多條數據而無法一頁顯示的情況下,可以用it查看下一頁的信息;
4、find 遊標查詢
>var cursor = db.users.find();
> while (cursor.hasNext()) {
printjson(cursor.next());
}
這樣就查詢所有的users信息,同樣可以這樣寫
var cursor = db.users.find();
while (cursor.hasNext()) {printjson(cursor.next); }
同樣可以省略{}號
5、forEach迭代循環
db.users.find().forEach(printjson);
forEach中必須傳遞一個函數來處理每條迭代的數據信息
6、將find遊標當數組處理
var cursor = db.users.find();
cursor[4];
取得下標索引爲4的那條數據
既然可以當做數組處理,那麼就可以獲得它的長度:cursor.length();或者cursor.count();
那樣我們也可以用循環顯示數據
for (var i = 0, len = c.length(); i <len; i++) printjson(c[i]);
7、將find遊標轉換成數組
> var arr = db.users.find().toArray();
> printjson(arr[2]);
用toArray方法將其轉換爲數組
8、定製我們自己的查詢結果
只顯示age <= 28的並且只顯示age這列數據
db.users.find({age: {$lte: 28}}, {age:1}).forEach(printjson);
db.users.find({age: {$lte: 28}}, {age:true}).forEach(printjson);
排除age的列
db.users.find({age: {$lte: 28}}, {age:false}).forEach(printjson);
9、forEach傳遞函數顯示信息
db.things.find({x:4}).forEach(function(x){print(tojson(x));});
參考:
http://www.cnblogs.com/xusir/archive/2012/12/24/2830957.html