最近測試組要求提供Windows Server 2012 Release Candidate版本測試環境。。。
真心坑爹。
------------開始部署--------------------
管理:VMvcenter
虛擬平臺VMEsxi5.0
網絡環境cisco3560
後端存儲FC-HBA+openfiler
-------------------------------------------------
第一個注意點:
Windows Server 2012 Release Candidate的安裝,經過反覆測試,確定需要首先選擇
win2008R2(64位)。
第二個注意點:
Esxi5.0不支持,必須升級到Esxi5.0U1以上版本。否則在安裝文件載入前無限藍屏循環 是這個樣子---> ): ......
第三個注意點:
以上都沒問題,安裝後仍然出現反覆重啓(實際測試中我沒有遇到,但是有一定中槍機率),官方給出的KB鏈接 http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=2021887 ,我貼出來說明下:
KB 1/2
- •Change the virtual machine to use EFI instead of BIOS. #修改BIOS引導方式
- 1.Right-click the virtual machine and click Power > Shut Down Guest. #VM關機
- 2.Right-click the virtual machine and click Edit Settings. #編輯故障VM配置文件
- 3.Click the Options tab. #選項
- 4.Click Boot Options. #引導項
- 5.Click EFI under Firmware. #選擇EFI
- 6.Click OK.
- 7.Power on the virtual machine. #VM開機
KB 2/2
- •Add vmGenCounter.enable = FALSE to the .vmx file of the virtual machine. #修改.vmx文件方式
- 1.Right-click the virtual machine and click Power > Shut Down Guest. #關機
- 2.Right-click the virtual machine and click Edit Settings. #老規矩,編輯VM配置
- 3.Click the Options tab. #選項
- 4.Under Advanced, click General. #高級--常規選項卡
- 5.Click Configuration Parameters. #點擊 配置參數 按鈕
- 6.Click Add Row. #添加
- 7.Under name, enter vmGenCounter.enable #新建列,命名爲 vmGenCounter.enable (注意最後面沒小數點)
- 8.Under value, enter False #值爲 False
- 9.Click OK to save the changes and then close the window. #保存
- 10.Power on the virtual machine. #繼續折騰。。。
第四個注意點:
模版部署的時候必須模版已經裝好VMtools才能自定義,
(PS:其實因爲沒有新的針對2012RC的自定義工具其實完全沒效果)
這就牽涉到另一個坑爹的地方,VMtools和2012有不和諧的地方,導致不能正常“合體”,很多人反饋說安裝VMtools後VM再次啓動後會黑屏/藍屏重啓。。。(實際測試中我沒有遇到,經常請客吃飯漲RP有麼有?!)怎麼辦?看下面的~!
第五個注意點:
Windows Server 2012 Release Candidate 下安裝VMtools的保險步驟(任選一個)
1.vm配置中顯卡改爲自動選擇設置
2.先安裝桌面體驗,打開aero透明,然後安裝vm tools (注意:rtm版8/server2012已沒有aero特效 )
3.不安裝VMtools也可以,性能略有下降。
不安裝VMtools的版本和安裝VMtools的版本一樣運行,經過反覆測試再沒有菊花了。RTM版本還是殘念。。。
----------------------收工-------