DNS服務配置
1.安裝bind服務
[root@localhost sbin]# yum install bind -y
...........//省略安裝過程
[root@localhost sbin]#
2.查看網卡信息（IP地址）
[root@localhost named]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.52.133 netmask 255.255.255.0 broadcast 192.168.52.255
inet6 fe80::3e1d:31ba:f66a:6f80 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:27:1c:3f txqueuelen 1000 (Ethernet)
RX packets 384057 bytes 558603083 (532.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 182891 bytes 11237471 (10.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
3.修改主配置文件
[root@localhost sbin]# vim /etc/named.conf
options {
listen-on port 53 { any; }; //127.0.0.1改爲any
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
recursing-file "/var/named/data/named.recursing";
secroots-file "/var/named/data/named.secroots";
allow-query { any; }; //localhost改爲any
[root@localhost sbin]#
4.修改區域配置文件
[root@localhost sbin]# vim /etc/named.rfc1912.zones
zone "abc.com" IN { //添加兩個區域信息
type master;
file "abc.com.zone";
allow-update { none; };
};
zone "xyz.com" IN {
type master;
file "xyz.com.zone";
allow-update { none; };
};
[root@localhost sbin]#
5.修改區域數據配置文件
[root@localhost sbin]# cd /var/named/
[root@localhost named]# ls
data dynamic named.ca named.empty named.localhost named.loopback slaves
[root@localhost named]# cp -p named.localhost abc.com.zone //複製模板並命名
[root@localhost named]# vim abc.com.zone
$TTL 1D
@ IN SOA @ rname.invalid. (
0 ; serial
1D ; refresh
1H ; retry
1W ; expire
3H ) ; minimum
NS @
A 127.0.0.1
www IN A 192.168.52.133 //添加解析地址
[root@localhost named]# cp -p abc.com.zone xyz.com.zone //複製abc域名的區域配置文件命名爲xyz域名
[root@localhost named]# ls
abc.com.zone data dynamic named.ca named.empty named.localhost named.loopback slaves xyz.com.zone
[root@localhost named]#
[root@localhost named]# systemctl start named //開啓dns服務
[root@localhost named]# systemctl stop firewalld.service //關閉防火牆
[root@localhost named]# setenforce 0 //關閉增強性安全功能
[root@localhost named]#
基於域名的虛擬主機配置
1.分別給兩個站點創建首頁文件
[root@localhost named]# mkdir -p /var/www/html/abc //創建abc站點
[root@localhost named]# mkdir -p /var/www/html/xyz //創建xyz站點
[root@localhost named]# cd /var/www/html/
[root@localhost html]# ls
abc xyz
[root@localhost html]# echo "this is abc web" > abc/index.html //創建首頁文件
[root@localhost html]# echo "this is xyz web" > xyz/index.html //創建首頁文件
[root@localhost html]#
2.修改nginx服務配置文件
[root@localhost html]# vim /usr/local/nginx/conf/nginx.conf
server {
listen 80; //監聽端口
server_name www.abc.com; //域名
charset utf-8; //字符集，utf-8支持中文字符
access_log logs/www.abc.com.access.log; //訪問日誌
location / {
root /var/www/html/abc; //站點
index index.html index.htm; //支持的首頁類型
}
error_page 500 502 503 504 /50x.html; //訪問錯誤文件
location = /50x.html {
root html; //站點
}
}
server {
listen 80; //監聽端口
server_name www.xyz.com; //域名
charset utf-8; //字符集，utf-8支持中文字符
access_log logs/www.xyz.com.access.log; //訪問日誌
location / {
root /var/www/html/xyz; //站點
index index.html index.htm; //支持的首頁類型
}
error_page 500 502 503 504 /50x.html; //訪問錯誤文件
location = /50x.html {
root html; //站點
}
}
[root@localhost html]#
3.檢查測試配置文件，並重啓服務
[root@localhost html]# nginx -t //檢查配置文件語法格式
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@localhost html]# service nginx restart //重啓服務
[root@localhost html]#
4.開啓一臺win10作爲測試機，設置dns地址
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
5.測試能否進行域名解析（成功）
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
6.用測試機瀏覽器訪問兩個域名
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
基於端口的虛擬主機配置
1.修改nginx服務的配置文件
[root@localhost html]# vim /usr/local/nginx/conf/nginx.conf
server {
listen 192.168.52.133:80; //監聽端口
server_name www.abc.com;
charset utf-8;
access_log logs/www.abc.com.access.log; //訪問日誌
location / {
root /var/www/html/abc; //站點
index index.html index.htm;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
}
server {
listen 192.168.52.133:8080; //監聽端口
server_name www.abc.com;
charset utf-8;
access_log logs/www.abc8080.com.access.log; //訪問日誌
location / {
root /var/www/html/abc8080; //站點
index index.html index.htm;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
}
2.測試配置文件
[root@localhost html]# nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@localhost html]#
3.創建8080端口站點目錄與首頁文件
[root@localhost html]# mkdir abc8080 //創建站點目錄
[root@localhost html]# echo "this is abc8080 web" > abc8080/index.html //創建首頁文件
[root@localhost html]# service nginx restart //重啓nginx服務
[root@localhost html]#
4.用測試機瀏覽器訪問相同域名的不同端口
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
基於IP的虛擬主機配置
1.給虛擬機添加一塊網卡
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
2.查看網卡信息（IP地址）
[root@localhost html]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.52.133 netmask 255.255.255.0 broadcast 192.168.52.255
inet6 fe80::3e1d:31ba:f66a:6f80 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:27:1c:3f txqueuelen 1000 (Ethernet)
RX packets 391887 bytes 559453355 (533.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 185573 bytes 11520948 (10.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ens36: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.52.139 netmask 255.255.255.0 broadcast 192.168.52.255
inet6 fe80::f7fb:4ddc:f4b6:b90a prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:27:1c:49 txqueuelen 1000 (Ethernet)
RX packets 14 bytes 1737 (1.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 24 bytes 4219 (4.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
3.修改域名區域數據配置文件“xyz.com.zone”的解析地址
[root@localhost html]# vim /var/named/xyz.com.zone
$TTL 1D
@ IN SOA @ rname.invalid. (
0 ; serial
1D ; refresh
1H ; retry
1W ; expire
3H ) ; minimum
NS @
A 127.0.0.1
www IN A 192.168.52.139 //修改ip地址爲192.168.52.139
[root@localhost html]# systemctl restart named //重啓dns服務
[root@localhost html]#
4.用測試機檢查域名解析是否正常（正常）
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
5.修改nginx服務的配置文件
[root@localhost html]# vim /usr/local/nginx/conf/nginx.conf
server {
listen 192.168.52.133:80; //監聽IP地址與端口
server_name www.abc.com; //域名
charset utf-8; //字符集，utf-8支持中文字符
access_log logs/www.abc.com.access.log; //訪問日誌
location / {
root /var/www/html/abc; //站點
index index.html index.htm; //支持的首頁格式
}
error_page 500 502 503 504 /50x.html; //訪問錯誤首頁文件
location = /50x.html {
root html; //站點
}
}
server {
listen 192.168.52.139:80; //監聽IP地址與端口
server_name www.xyz.com; //域名
charset utf-8; //字符集，utf-8支持中文字符
access_log logs/www.xyz.com.access.log; //訪問日誌
location / {
root /var/www/html/xyz; //站點
index index.html index.htm; //支持的首頁格式
}
error_page 500 502 503 504 /50x.html; //訪問錯誤首頁文件
location = /50x.html {
root html; //站點
}
}
6.測試配置文件，沒有問題，重啓服務
[root@localhost html]# nginx -t //測試配置文件
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@localhost html]# service nginx restart //重啓服務
[root@localhost html]#
7.用測試機分別訪問兩個不同IP地址的域名
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
![Nginx服務虛擬主機的配置----------基於域名、端口、IP（實戰！）]()
