中小型公司不同區域ospf實現互通

原創 貪戀你的蓴 2018-09-12 06:32

實驗名稱：中小型公司不同區域ospf實現互通

實驗拓撲：中小型公司不同區域ospf實現互通

實驗所需設備：

                       7臺路由器
                                                 2臺PC機

地址規劃：

設備 IP 子網掩碼
pc1 192.168.9.5 /24
PC2 192.168.10.5 /24
設備 端口 IP地址 子網掩碼 所屬區域
AR1 G0/0/1 192.168.1.1 /24 0區域
AR1 G0/0/0 192.168.5.1/ 24 2區域
AR2 G0/0/0 192.168.1.2 /24 0區域
AR2 G0/0/1 192.168.2.1 /24 0區域
AR2 G0/0/2 192.168.6.1 /24 0區域
AR3 G0/0/0 192.168.2.2 /24 0區域
AR3 G0/0/1 192.168.3.1 /24 1區域
AR4 G0/0/0 192.168.6.2 /24 0區域
AR4 G0/01 192.168.7.1 /24 2區域
AR5 G0/0/0 192.168.7.2 /24 2區域
AR5 G0/0/1 192.168.5.2 /24 2區域
AR5 G0/0/2 192.168.8.1 /24 3區域
AR5 G4/0/0 192.168.9.254/ 24 2區域
AR6 G0/0/0 192.168.3.2 /24 1區域
AR6 G0/0/1 192.168.4.254/ 24 1區域
AR7 G0/0/0 192.168.8.2 /24 3區域
AR7 G0/0/1 192.168.10.254/ 24 3區域

實驗目的：實現不同區域之間互通

實驗步驟：

配置AR1

<Huawei>SYS

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown.

[Huawei-GigabitEthernet0/0/1]ip add 192.168.1.1 255.255.255.0

Jan 18 2018 17:47:27-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.

[Huawei-GigabitEthernet0/0/1]q

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown.

[Huawei-GigabitEthernet0/0/0]ip add 192.168.5.1 255.255.255.0

Jan 18 2018 17:50:04-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int l

[Huawei]int LoopBack 1

[Huawei]int LoopBack 1

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]

[Huawei-LoopBack1]ip add 10.10.1.1 255.255.255.0

[Huawei-LoopBack1]q

[Huawei]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ospf r

[Huawei]ospf router-id 1.1.1.1

[Huawei-ospf-1]area 0

[Huawei-ospf-1-area-0.0.0.0]ne

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]network

Jan 18 2018 18:01:07-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.0]network 10

Jan 18 2018 18:01:07-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.0]network 10

Jan 18 2018 18:01:07-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.0]network 10

Jan 18 2018 18:01:07-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.0]network 10

Jan 18 2018 18:01:07-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.0]network 10.

Jan 18 2018 18:01:07-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.0]network 10.10.1.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]q

[Huawei-ospf-1]area 2

[Huawei-ospf-1-area-0.0.0.2]net

[Huawei-ospf-1-area-0.0.0.2]network 192.168.5.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:51-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.5.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:55-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.5.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:55-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.5.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:55-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.5.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:55-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.5.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ospf

[Huawei-ospf-1]area 2

[Huawei-ospf-1-area-0.0.0.2]v

[Huawei-ospf-1-area-0.0.0.2]vlink-peer 5.5.5.5

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:21-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[0]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=5.5.5.5, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:21-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)
[1]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=5.5.5.5, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:21-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[2]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=5.5.5.5, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:21-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[3]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=5.5.5.5, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:21-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[4]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=5.5.5.5, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.2]

配置AR2

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown.

[Huawei-GigabitEthernet0/0/0]ip add 192.168.1.2 255.255.255.0

Jan 18 2018 17:47:51-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown.

[Huawei-GigabitEthernet0/0/1]ip add 192.168.2.1 255.255.255.0

Jan 18 2018 17:48:08-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.

[Huawei-GigabitEthernet0/0/1]q

[Huawei]int g0/0/2

[Huawei-GigabitEthernet0/0/2]undo shutdown

Info: Interface GigabitEthernet0/0/2 is not shutdown.

[Huawei-GigabitEthernet0/0/2]ip add 192.168.6.1 255.255.255.0

Jan 18 2018 17:50:39-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet0/0/2 has entered the UP state.

[Huawei-GigabitEthernet0/0/2]q

[Huawei]int l

[Huawei]int LoopBack 1

[Huawei-LoopBack1]ip add 10.10.2.2 255.255.255.0

[Huawei-LoopBack1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ospf r

[Huawei]ospf router-id 2.2.2.2

[Huawei-ospf-1]area 0

[Huawei-ospf-1-area-0.0.0.0]net

[Huawei-ospf-1-area-0.0.0.0]network 192.168.2.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 00

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 00

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)
[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 00

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 00

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 00

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 00

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.2.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.0]network 192.168.1.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]network 10.10.2.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]q

[Huawei-ospf-1]

Jan 18 2018 18:01:01-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes event: neighbor status changed. (ProcessId=256,
NeighborAddress=1.1.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1]

Jan 18 2018 18:01:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1]

Jan 18 2018 18:01:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1]

Jan 18 2018 18:01:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1]
Jan 18 2018 18:01:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1]

[Huawei-ospf-1]area 0

[Huawei-ospf-1-area-0.0.0.0]ne

[Huawei-ospf-1-area-0.0.0.0]network 192.168.6.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:02:37-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.6.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:02:46-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.6.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:03:10-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.6.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:03:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.6.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:03:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.6.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:03:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.6.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.0]

配置AR3

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown.

[Huawei-GigabitEthernet0/0/0]ip add 192.168.2.2 255.255.255.0

Jan 18 2018 17:48:27-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown.

[Huawei-GigabitEthernet0/0/1]ip add 192.168.3.1 255.255.255.0

Jan 18 2018 17:48:44-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.

[Huawei-GigabitEthernet0/0/1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int l

[Huawei]int LoopBack 1

[Huawei-LoopBack1]ip add 10.10.3.3 255.255.255.0

[Huawei-LoopBack1]q

[Huawei]ospf r

[Huawei]ospf router-id 3.3.3.3

[Huawei-ospf-1]area 1

[Huawei-ospf-1-area-0.0.0.1]ne

[Huawei-ospf-1-area-0.0.0.1]network 192.168.3.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.3.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.1]q

[Huawei-ospf-1]area 0

[Huawei-ospf-1-area-0.0.0.0]ne

[Huawei-ospf-1-area-0.0.0.0]network 192.168.2.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]network 10.10.3.3 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]q

[Huawei-ospf-1]

Jan 18 2018 18:00:09-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1]

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1]

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1]

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1]

Jan 18 2018 18:00:15-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.2.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1]

配置AR4

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown.

[Huawei-GigabitEthernet0/0/0]ip add 192.168.6.2 255.255.255.0

Jan 18 2018 17:51:01-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown.

[Huawei-GigabitEthernet0/0/1]ip add 192.168.7.1 255.255.255.0

Jan 18 2018 17:51:25-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.

[Huawei-GigabitEthernet0/0/1]

[Huawei-GigabitEthernet0/0/1]q

[Huawei]int l

[Huawei]int LoopBack 1

[Huawei-LoopBack1]ip add 10.10.4.4 255.255.255.0

[Huawei-LoopBack1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ospf r

[Huawei]ospf router-id 4.4.4.4

[Huawei-ospf-1]area 0

[Huawei-ospf-1-area-0.0.0.0]ne

[Huawei-ospf-1-area-0.0.0.0]network 192.168.6.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:02:38-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.6.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.0]

Jan 18 2018 18:02:38-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.6.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.0]network 10.10.6.6 0.0.0.0

[Huawei-ospf-1-area-0.0.0.0]q

[Huawei-ospf-1]area 2

[Huawei-ospf-1-area-0.0.0.2]ne

[Huawei-ospf-1-area-0.0.0.2]network 192.168.7.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:14-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.6.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:14-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.6.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:14-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.6.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:14-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.6.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:03:59-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.7.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:04:05-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.7.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:04:05-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.7.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:04:05-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.7.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 18:04:05-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.7.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.2]

配置AR5

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown.

[Huawei-GigabitEthernet0/0/1]ip add 192.168.5.2 255.255.255.0

Jan 18 2018 17:51:59-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.

[Huawei-GigabitEthernet0/0/1]q

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown.

[Huawei-GigabitEthernet0/0/0]ip add 192.168.7.2 255.255.255.0

Jan 18 2018 17:52:15-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int g0/0/2

[Huawei-GigabitEthernet0/0/2]undo shutdown

Info: Interface GigabitEthernet0/0/2 is not shutdown.

[Huawei-GigabitEthernet0/0/2]ip add 192.168.8.1 255.255.255.0

Jan 18 2018 17:52:32-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet0/0/2 has entered the UP state.

[Huawei-GigabitEthernet0/0/2]q

[Huawei]int g4/0/0

[Huawei-GigabitEthernet4/0/0]undo shutdown

Info: Interface GigabitEthernet4/0/0 is not shutdown.

[Huawei-GigabitEthernet4/0/0]ip add 192.168.9.254 255.255.255.0

Jan 18 2018 17:52:51-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP on the interface GigabitEthernet4/0/0 has entered the UP state.

[Huawei-GigabitEthernet4/0/0]q

[Huawei]

[Huawei]int l

[Huawei]int LoopBack 1

[Huawei-LoopBack1]ip add 10.10.5.5 255.255.255.0

[Huawei-LoopBack1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ospf r

[Huawei]ospf router-id 5.5.5.5

[Huawei-ospf-1]area 2

[Huawei-ospf-1-area-0.0.0.2]n

[Huawei-ospf-1-area-0.0.0.2]network 192.168.5.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.2]network 192.168.5

Jan 18 2018 18:03:54-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.5.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.

Jan 18 2018 18:03:54-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.5.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.

Jan 18 2018 18:03:54-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.5.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.

Jan 18 2018 18:03:54-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.5.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.

Jan 18 2018 18:03:54-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.5.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.

Jan 18 2018 18:03:54-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.5.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.7.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.2]network 192.168.9.

Jan 18 2018 18:04:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.7.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.9.

Jan 18 2018 18:04:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.7.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.9.

Jan 18 2018 18:04:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.7.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.9.

Jan 18 2018 18:04:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.7.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.9.

Jan 18 2018 18:04:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.7.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.9.

Jan 18 2018 18:04:06-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.7.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.2]network 192.168.9.254 0.0.0.0

[Huawei-ospf-1-area-0.0.0.2]q

[Huawei-ospf-1]area 3

[Huawei-ospf-1-area-0.0.0.3]ne

[Huawei-ospf-1-area-0.0.0.3]network 192.168.8.1 0.0.0.0

[Huawei-ospf-1-area-0.0.0.3]

Jan 18 2018 18:05:26-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.8.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.3]

Jan 18 2018 18:05:28-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.8.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.3]

Jan 18 2018 18:05:28-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.8.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.3]

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.8.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.3]

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=2.8.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.3]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei-ospf-1-area-0.0.0.3]q

[Huawei-ospf-1]area 2

[Huawei-ospf-1-area-0.0.0.2]v

[Huawei-ospf-1-area-0.0.0.2]vlink-peer 1.1.1.1

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:10-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[0]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=1.1.1.1, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:19-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[1]:Virtual link peer event: neighbor status changed. (ProcessId=256,
VirtualLinkNeighborAddress=1.1.1.1, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:19-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[2]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=1.1.1.1, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:19-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[3]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=1.1.1.1, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.2]

Jan 18 2018 19:45:19-08:00 Huawei %%01OSPF/4/VLINK_NBR_CHG_E(l)[4]:Virtual link peer event: neighbor status changed. (ProcessId=256, VirtualLinkNeighborAddress=1.1.1.1, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.2][Huawei-ospf-1]area 2

配置AR6

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown.

[Huawei-GigabitEthernet0/0/0]ip add 192.168.3.2 255.255.255.0

Jan 18 2018 17:49:09-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown.

[Huawei-GigabitEthernet0/0/1]ip add 192.168.4.254 255.255.255.0

Jan 18 2018 17:49:24-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.

[Huawei-GigabitEthernet0/0/1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int l

[Huawei]int LoopBack 1

[Huawei-LoopBack1]ip add 10.10.6.6 255.255.255.0

[Huawei-LoopBack1]q

[Huawei]ospf

[Huawei]ospf ro

[Huawei]ospf router-id 6.6.6.6

[Huawei-ospf-1]area 1

[Huawei-ospf-1-area-0.0.0.1]net

[Huawei-ospf-1-area-0.0.0.1]network 192.168.3.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.1]network 192.168.4.254 0.0.0.0

[Huawei-ospf-1-area-0.0.0.1]q

[Huawei-ospf-1]area 1

[Huawei-ospf-1-area-0.0.0.1]net

[Huawei-ospf-1-area-0.0.0.1]network 10.10.6.6 0.0.0.0

[Huawei-ospf-1-area-0.0.0.1]q

[Huawei-ospf-1]

Jan 18 2018 17:59:05-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.3.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.3.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[Huawei-ospf-1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.3.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.3.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1]

Jan 18 2018 17:59:11-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.3.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1]

配置AR7

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]undo shutdown

Info: Interface GigabitEthernet0/0/0 is not shutdown.

[Huawei-GigabitEthernet0/0/0]ip add 192.168.8.2 255.255.255.0

Jan 18 2018 17:53:16-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]undo shutdown

Info: Interface GigabitEthernet0/0/1 is not shutdown.

[Huawei-GigabitEthernet0/0/1]ip add 192.168.10.254 255.255.255.0

Jan 18 2018 17:53:43-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.

[Huawei-GigabitEthernet0/0/1]

[Huawei-GigabitEthernet0/0/1]q

[Huawei]int l

[Huawei]int LoopBack 1

[Huawei-LoopBack1]ip add 10.10.7.7 255.255.255.0

[Huawei-LoopBack1]q

[Huawei]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ospf r

[Huawei]ospf router-id 7.7.7.7

[Huawei-ospf-1]area 3

[Huawei-ospf-1-area-0.0.0.3]n

[Huawei-ospf-1-area-0.0.0.3]network192.168.8.2 0.0.0.0
^
Error: Unrecognized command found at '^' position.

[Huawei-ospf-1-area-0.0.0.3]ne

[Huawei-ospf-1-area-0.0.0.3]network 192.168.8.2 0.0.0.0

[Huawei-ospf-1-area-0.0.0.3]network

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.8.168.192, NeighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[Huawei-ospf-1-area-0.0.0.3]network

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.8.168.192, NeighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[Huawei-ospf-1-area-0.0.0.3]network

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.8.168.192, NeighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[Huawei-ospf-1-area-0.0.0.3]network

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.8.168.192, NeighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange)

[Huawei-ospf-1-area-0.0.0.3]network

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.8.168.192, NeighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)

[Huawei-ospf-1-area-0.0.0.3]network

Jan 18 2018 18:05:29-08:00 Huawei %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes event: neighbor status changed. (ProcessId=256, NeighborAddress=1.8.168.192, NeighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[Huawei-ospf-1-area-0.0.0.3]network 192.168.10.254 0.0.0.0

[Huawei-ospf-1-area-0.0.0.3]network 10.10.7.7 0.0.0.0

[Huawei-ospf-1-area-0.0.0.3]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

驗證測試：

            PC1 ping PC2  PC1 ping PC 3

            ![](http://i2.51cto.com/images/blog/201801/18/171af15c3435b88fe850ee92bd5adc47.png?x-oss-process=image/watermark,size_16,text_QDUxQ1RP5Y2a5a6i,color_FFFFFF,t_100,g_se,x_10,y_10,shadow_90,type_ZmFuZ3poZW5naGVpdGk=)

注意：

                    通過虛鏈路建立的ospf鄰居關係，永遠屬於區域0；虛鏈路的建立，是依靠底層的真實鏈路所在的區域來傳輸
        Ospf報文的（hello等）所以如果底層的“穿越/傳輸區域”不穩定的話，則會導致上層的“虛鏈路”不穩定，則影響整個網絡的骨幹區域的穩定性。

所以，一般不建議使用這種方式。
如果不得不使用，那麼也僅僅是臨時的解決方案。

發表評論
所有評論
還沒有人評論，想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章

OSI模型

lyf執念 2019-02-22 23:04:31

在 單 個 區 域 配 置OSPF

wpgs 2019-02-23 14:05:20

互連多個OSPF區域

wpgs 2019-02-23 14:05:20

OSPF篇：幀中繼承載OSPF-廣播

shejp4010 2019-02-23 13:22:24

ipv6配置

shejp4010 2019-02-23 13:22:24

LVS集羣部署詳細過程（LVS+OSPF）

vfast_wuwei 2019-02-23 12:55:06

LVS在大流量下基於OSPF的負載均衡實施方案

vfast_wuwei 2019-02-23 12:55:03

ospf缺省路由的產生

網絡征途 2019-02-23 00:33:41

多區域ospf配置

零度智商 2019-02-23 00:22:59

ospf基本配置

Fever丶傑 2019-02-23 00:07:01

ospf

shuiyong1989 2019-02-22 23:16:58

lvs fullnat部署手冊（二）keepalived配置篇

紫暝1127 2019-02-22 23:07:00

基於centos部署lvs fullnat 彙總

紫暝1127 2019-02-22 23:07:00

H3C——路由引入和路由過濾配置實例

maguanghua00 2019-02-22 22:43:20

18.2 OSPF多區域原理與配置

409045352zt 2019-02-22 22:26:19