VMWare安裝Gentoo錯誤"cannot open root device sda3...&am

 參考：http://www.linuxso.com/linuxrumen/14856.html

問題的原因是由於缺少SCSI驅動引起的

 

解決方法如下：

Step 1: 修改SCSI驅動類型

VM->Edit Settings->SCSI controller 0->change type，設爲BusLogic

建議直接編輯虛擬主機目錄下的gentoo.vmx文件  scsi0.virtualDev = "buslogic"   （原先爲lsilogic）

 

此項設置據說是因爲2.6+的內核不再支持LSI Logic

 

Step 2: 用LiveCD啓動，並進入編譯環境

參考http://www.gentoo.org/doc/en/gentoo-x86-quickinstall.xml

livecd/ # mount /dev/sda3 /mnt/gentoolivecd / # mount /dev/sda1 /mnt/gentoo/bootlivecd / # mount -t proc proc /mnt/gentoo/proclivecd / # mount --rbind /dev /mnt/gentoo/devlivecd / # chroot /mnt/gentoo /bin/bashlivecd / # env-update&& source /etc/profile

 

Step 3:設置內核參數

參考：http://www.gentoo-wiki.info/HOWTO_Install_Gentoo_on_VMware_ESX_server

Linux Kernel Configuration: VMware SCSI adapter

Device Drivers  --->  SCSI devicesupport  ---> ** Turn off EVERYTHING under here besides what is shown below **     <*> SCSI disk support         SCSI low-level drivers  --->            <*> BusLogic SCSI support

 

livecd linux # make menuconfiglivecd linux #timemake -j2livecd linux # make modules_installlivecd linux #cparch/i386/boot/bzImage /boot/kernel

 

Step 4: 重啓確認問題解決

livecd conf.d #exit
livecd / #umount /mnt/gentoo/dev /mnt/gentoo/proc /mnt/gentoo/boot /mnt/gentoo
livecd / #reboot